I created a user pattern with 12 steps. Corresponding a user rhythm with 14 steps, (2 steps muted) = 12 steps also. When I now start playing motif1, the pattern starts with step 1, the rhythm with step 4. Shouldn`t they start both on step 1 when I press the play all button?

https://soundcloud.com/user-417871575/mu...ck-simmers

Made this over Thanksgiving, while cooking the festive family meal  The pad was the Streichfett, drone was Blofeld, Motif 1 also went through Blofeld, and Motif 2 was a Mopho.  The key is Dm harmonic.  My goal was to make something that was constantly evolving and didn't need a whole lot of direct hands-on attention.

Sure it's long (17:33), but considering the turkey stock simmered for almost 18 hours, it could have been longer.

Hi,

I received my new NDLR today and tried to connect to a PC with Reaper and VSTs.

I cannot get it to work at all.

I changed the Midi Output to USB 1 - no notes send.

I also setup MIDI-OX to receive on NDLR Midi in - and it receives the Start and Stop messages .. however it does not receive any note events at all.

If I remove all Filters in MIDI-OX I can see the clock and the start/stop messages:
00055B9A  2  --    F8    --    --  --  ---  Timing Clock         
00055BB4  2  --    F8    --    --  --  ---  Timing Clock         
00055BCF  2  --    F8    --    --  --  ---  Timing Clock         
00055BEA  2  --    F8    --    --  --  ---  Timing Clock         
00055C04  2  --    F8    --    --  --  ---  Timing Clock         
00055C04  2  --    FA    --    --  --  ---  Start               
00055C1F  2  --    F8    --    --  --  ---  Timing Clock         
00055C39  2  --    F8    --    --  --  ---  Timing Clock         
00055C54  2  --    F8    --    --  --  ---  Timing Clock         
00055C64  2  --    FC    --    --  --  ---  Stop                 
00055C6F  2  --    F8    --    --  --  ---  Timing Clock         
00055C89  2  --    F8    --    --  --  ---  Timing Clock         
00055CA4  2  --    F8    --    --  --  ---  Timing Clock



But thats it. Any Idea what is going wrong and Why I do not see any output?

BTW: It is irrelevant if I use PAD, Drone or Motifs ... nothing there - not on any press on any of the chord buttons.

Hi Community,

I just purchased a NDLR a few days ago.

My problem is that the master clock start/stop messages from my other sequencer (Toraiz Squid) doesn't go though the NDLR.

The Synths that I trigger with the NDLR don't get the SSC any more. I tried all menu-settings for the clock-out-port, without success.

MIDI-notes are passed through correctly, only SSC messages aren't.

My Squid is connected to MIDI B Input, my synths are connected to MIDI B Output.

The Squid is not using the same channel as the NDLR Cntl channel. (I don't use/need the Cntl channel at all.)

(I haven't tried yet to use the same channel as KB Trans.  - because I don't want the KB to transpose...

As the masterclock comes from my Squid, the NDLR is set to external clock. There IS a clock coming in, the NDLR shows that with the blinking letters on the display.)

Dang, another cool synth is announced. I've got a Blofeld, two mono evolvers and a poly evolver. Do I need another wave synth? I think the answer is, of course I do!   Always wanted a vector synthesis synth like the Fizmo (transwave), but they are big and expensive.  This might be the one, we'll see about the price.

I could have sworn I was using chord buttons to preview chords without having to start the pad part, but now they don't do anything except change the chord type. I've tried resetting everything (even though it doesn't seem to have wiped out previously saved chord sequences, midi channel settings, etc?).  It seems to work fine other than that so am I imagining a feature that doesn't exist? Also, would expect a factory reset to completely erase previous settings.

This morning I setup controlling the NDLR with my Minilogue XD’s keyboard.  Changing chords appeared to be working fine but when I went to change the patch on ML the NDLR screen got all screwed up and now the drone and pad position indicators on the top of the screen are missing and none of the parts seem to play.  I tried to flash with the latest beta firmware but still the same issue as before the update.  Any ideas?

EDIT: read the manual and realized there was a boot menu with factory reset... this corrected my issue. would be interesting to know what exactly happened though.

I ran into an interesting issue while traveling with my NDLR and my Synthstrom Deluge. If I use USB Host mode on the Deluge to power the NDLR and connect to the Deluge, then the MIDI clock runs at 2x or sometimes 4x the tempo setting on the NDLR. At home, I have everything connected with MIDI cables, and the clock sync works as expected.

I would guess that the NDLR is sending clock messages out on all USB MIDI devices, and the Deluge is interpreting them as coming from the same device (since its USB Host mode doesn’t really support multiple devices).

There are various workarounds, including not connecting USB between the devices, but it is a pretty convenient setup otherwise, in that I don’t have to carry around a separate power supply for the NDLR, and a 5-pin MIDI cable. It’d be nice to have an option on NDLR to not send clock messages to all USB devices, maybe automatically if all parts are routed to USB1, for instance?

Hi,
Received my NDLR today and it looks awesome.. but...
All the knobs on the front panel are missing!

Can someone please PM me to get them sent out??

thanks

"The NDLR accepts these messages ONLY on the MIDI 5 Pin port B and USB port 1, all SSC messages on other ports are IGNORED. "

I just beat my head against the wall for 30 minutes trying to figure out why this wasn't working, because I was using in A. Something like this shouldn't be buried deep in the depths of the manual! Now, where's the Advil....