Hi! 
I use Deluge to sequence Alpha Base. Problem is that Alpha Base use Midi channel 1-11 and 16. Only 4 channels left for sequence other synths. Is it possible to use MRCC to pass forward only channel 16 to Deluge so I can use channel 1-15 for sequence other synths?

Thanks!

Rather than User 1 etc, it would be nice if each save could be given a descriptive name with a keyboard.

Hi there.

I have set the MRCC to receive prog changes on channel 16 input 1 but it seems to respond to all channels.

all one live session no edits. very very silly

 

Please forgive this noobish post, but I am having trouble accomplishing something that seems super basic.  I’d like to use my Octatrack as a midi Sequencer for a variety of synths connected via midi, all routed through the MRCC.  I’d like to sequence 8 different synths from my Octatrack with each synth corresponding with channels 1-8 on the OT’s midi out, but have the midi messages be received (on those other synths) as though they originated from channel 1 in each instance.  

For example, midi channel 5 on the OT is destined for a Matrix 6, I send a sequence of notes over midi channel 5 to the MRCC (from the OT) and it routes the data to the M6 using midi out port 5 but the M6 thinks it is coming from channel 1 and not 5.  

I have not been able to successfully configure my MRCC to do this despite having the manual open in front of me, googling, and searching the forum.  I am not positive if this is midi channel mapping issue or if I should be filtering messages per port or what?  Thanks so much!  

Hi Forum!

In the manual on page 29 in the chapter "Channel Map Sub-Page" in the section "Channel In 1-4" it is mentioned that as incoming channel besides the mandatory 16 MIDI channels also "none" can be selected.

Unfortunately the manual seems to be ahead of the current firmware version. On my MRCC with version 1.1.037 this selection option is apparently not available or I am unable to find it.

But since I would actually use this option all the time, I wonder when this function will be delivered?

Thanks
Andy

Hi!
Just received my new MRCC from the shop of Conductive labs. 4 white plastic (for the lights I assume) was loose in the plastic bag that MRCC was delivered in. Happened to anyone else? I put them back but they fall out very easily. What to do? Glue them?

Thanks!

Regards
Peter

Before I go ordering a powered USB hub, what happens with two MRCCs plugged into a hub?  Does that work or does each MRCC need to be on a dedicated port on the computer?

I have 4 things plus keyboard and mouse that all want USB connectivity to the computer and am trying to figure out the best way to do that.

So this is done using all 4 parts of the NDLR playing sounds from the k2000rs
With the Kawai mp7 providing the hauting overtone. Played live with no daw and no edits.

After going nuts with operator mods and things changing, I am liking the more simple use of the ndlr. only 1 motif. a drone.