Hi there and a big hello to you all

I'm a couple of days away from receiving my NDLR and, having read the manual but being a bit of a noob at these sorts of things, I've got a few questions regarding connectivity.

I'm an Ableton user and my set up is basically split between MIDI and USB connections. So, half of my synths go to my MIDI interface which is then connected by USB to my Mac. And the other half go to a USB hub which is then connected by USB to my Mac.

Where does NDLR fit in with this set up?

Thank you!

Hello all,

Just received my new NDLR on July 3rd. I just want to report that the inconsistent Encoder value-per-click issue reported in several earlier posts is still happening. 

Problem description: rotating an encoder should produce a change in value per click. Actual behavior is inconsistent, requiring one, two or three clicks before the value changes. This depending on encoder and parameter. The issue is present on all encoders. The behavior is always the same for a given parameter. Example, in my unit:
Motif 1 - Pattern variation selection: 
- from forward to backward: three clicks
- from backward to ping-pong: two clicks
- from ping-pong to ping-pong 2: three clicks
- from ping-pong 2 to odd/even: 2 clicks
- from odd/even to random: 3 clicks
Additional observation, after going from one setting to the next and then you toggle the encoder back and then forth between the two settings, the encoder responds correctly with one click. Example, from initial forward to backward you need three clicks, but then you can toggle from forward to backward and vice versa with one click.

Running FW 1.1.066

Other than this nagging issue, so far having a lot of fun with this little unit!   

Cheers

J

Hi, I just received the NDLR yesterday as part of the 3A batch and I have noticed I can change all of the parameters except the mode and key.  Is there some other action other than pressing the encoder to access this menu?  Or is it possible there is something wrong with the knob itself.  I can change the tempo but not the key or mode even if I press it.

This issue only appears when you are setting the clock divider for Motif 1 using external CC control - Motif 2 works as expected and reliably

On Motif 1 when you change the clock divider with the hardware knobs on the NDLR the divider maintains sync as you would expect.. it shifts seamlessly between  all six clock divisions and the timing is locked to a grid. Perfect. 

On Motif 1 when you change the clock divider with CC control Motif 1  loses  sync to the timing grid. You may have  to do it several times alternating between the settings via CC before it becomes obvious.  It is much easier to notice it when you have a drum pattern playing...  This issue does not impact Motif 2... motif 2 always keeps a lock to the grid no matter how many times you change the clock divisor using CCs. 

If you can't replicate this I will post a video on Monday.

Hello team... this is issue is long standing and appears in all the firmware iterations that I have tested including 1.1.066.   In short... NDLR received a Midi Stop command and the Motif Velocity is set to Zero ... Motif 2 Velocity remains as previously set.   This means that you can't hear Motif 1 unless you increase the velocity.. Motif 2 works as expected.   Please see the short clip below. 

- Scott Harris

https://youtu.be/LoHcpJKYI2w

Dreadbox Typhon Sound Demo (no talking)
https://youtu.be/HwV3d5BHJrE

Hi

I'm about to buy a NDLR as I've wanted one since it appeared but my question is this: I have quite a large dawless setup which is centred around a Toraiz Squid, a Novation Circuit and a 1010music Blackbox. All this lot control a few synths and a couple of drum machines and I'm pretty happy with how it all works but would like to add some of that NDLR magic into the equation. Would the best bet be to place the NDLR between the Squid and the synths hanging off the midi outs? I'd still like to be able to use the Squid as the clock master and to be able to sequence some parts from it.

Hope all that makes some kind of sense...


John

Hi guys,
Since updating to the latest firmware, I am experiencing a stuck note on Motif 1 every time I turn it off. I’m running the four parts on four separate midi channels, three to the Elektron Analog Four and the pad part to the Korg Wavestate. The panic button works to a degree but, of course, kills the pad part as well, so is not ideal. 
As I said, this is happening without fail, every time I toggle the Motif button off. Is there anything that anyone can think of that may aid me, it would be most gratefully received.
I absolutely love my NDLR, but this is proving to be a bit of a mystery.

Hello,

Waiting to receive my NDLR (for a loooong time ;-)), I'm reading the manual to learn basics and I have a question about Chords in NDLR.

How can I tell NDLR to play Chords that are not in the scale selected such as secondary dominant chords or chords from parallel scales (eg . C major selected and I want to play a chord from Cminor scale) ? Can I do that with NDRLR ? Do I have to use the Chord Sequencer ?
I did'n find an answer in the manual.

 Can you also please explain how alt1 & alt2 chords are built ?

All the best.
Eric.

Any plans of releasing a 1u rack mountable version?  Slimline, ideally where all connectors are mounted on rear panel?