I really don´t understand how these settings work!

In another Thread someone explained it with a Arturia Keystep: Both (NDLR Cntl and KB Trans) set on the same Midi Ch and you can switch your synths to every scale you like but the NDLR will change its chords on the white keys of C major. That is how I understand it, but it does not work: If I put both to 16 I can´t change any chord via my keyboard, If I put NDLR Cntl to 15 and KB Trans to 16, I can change NDLR chords with my keyboard on CH 15.

In the above thread there was a link to YT video that should clear it up - it was no help, just a pretty NDLR session on a Keystep and a Blofeld. A tutorial video would help a lot !!

Another thing is the completely undocumented feature under SHIFT MENU ENC 2: Rotation Algorithm, it was asked for help in another thread a while ago and nothing happened. Users seem still trying to sort it out but are left in a foggy forest. (The KB Trans MIDI CH is mentioned on that menu point as well by the way)

The NDLR beta firmware 1.1.079 is meanwhile 3 years old and still a beta, this tells a lot I think, are you guys only working on the MRCC any more? (..or on new forum skins ;-)

I had great hardware support a while ago and I think the NDLR is still an awesome device, but I am a bit disappointed.

I won´t ask for features or improvements any longer, but: A VIDEO ABOUT NDLR Cntl and KB Trans WOULD REALLY BE APPRECIATED !

I have a Kawai R100 connected up to Remote Out 3, and I want to stop clock being sent to it.  Is there a way to do this.  I can't find the Remote7 outputs on the Output Filters. My Remote7 is set up as Remote 1-5 on the settings page.

Hi.

Some of my kit starts its program numbering at 0, the rest starts at 1 it would be cool if there was some sort of on/off transform function to compensate for this so that when I send PC 001 from the sequencer it loads PC 001 in everything.

Thanks.

1. Does the mrcc have the ability to remap poly aftertouch to channel pressure and vice versa? trying to fix an issue with a synth reading only one or the other from various midi controllers.
   
2. Will it pass through, besides sending the MIDI data, is also transmitting - CDC (serial) and Raw HID. Related to use with Polyend Play see link: https://help.polyend.com/431975-My-iConnectivity-MIDI-USB-hub-is-not-recognising-my-Polyend-instrument-why
   
3. When interfacing with the computer, am I able to name the inputs and outputs on the MRCC device and the names will show up in audio/midi setup on Mac, therefore being passed onto DAW's? 
   
4. Am I able to setup an RTP Midi network? Not so important but coming from MioXL where I have one device working through RTP currently
   
5. Does the device allow for connection to iOS/iPad midi devices? I plan to add an iPad on next update, not as familiar with how these will interface
   
6. On virtual inputs on host USB ports, does that mean we can plug a USB hub for access to the 4 inputs? Read FAQ and it says not really, I'm trying to understand how the 4 virtual inputs per host port work, maybe get an example use case?
   
7. Can the MRCC receive midi clock from a connected device then translate or sync its internal clock to send the same clock out of its cv clock output?
   
8. If I need to expand with a second unit, would I configure advanced functions from one screen or from both separately?
   
9. Will the virtual midi ports seen by a Mac audio/midi setup be available to route software and be viewed as additional input/outputs on the device for various saved routings? Example currently is I have to use midi input/output in settings on Komplete kontrol keyboard software to translate incoming MPE from a roli seaboard to get it to send the Roli to other external synths, currently routed through a MidXL, the Komplete kontrol is receiving from itself, the roli and a polyend play to route to other devices without opening a DAW.
   I know its a lot of questions, if anyone can answer one or two, I appreciate everyone's time.  Probably ordering one anyway to test but would be nice to know these in advance.
   
10. Can I use a basic trs mini cable to transmit trs midi from one device to trs midi on the MRCC? Any special cable requirements for type a vs b? Use case is a launchpad type controller with trs output going direct to trs input without those trs to midi converter cables.
    

Hello! I'm getting an SP404 Mk2, and its MIDI implementation is a bit odd. Each bank on the SP404 Mk2 responds to the same 16 MIDI notes, but on a different MIDI channel. I was wondering if I could use the keyboard split feature to get access to more banks using one MIDI channel. Any ideas on how I would achieve this?

Thanks!

I discovered today that suddendly I can neither save nor load any preset on the MRCC.

I was on firmware 1.0.35 when this problem happened.

I upgraded to version 1.0.52 thinking it might fix the problem, but unfortunately not.

I removed the SD card from the MRCC (as recommended by Jesse in another thread) and mounted it on my Mac without problems.

I reinserted the card in the MRCC and tried saving and loading again but the problem remained.

I did a reset on the MRCC (during bootup) but despite the message on the screen, it did infact not delete neither the presets nor the saved user labels on the sd card.

I removed the card again, mounted it on my Mac and formatted it (in Fat16) using the SD card foundations official formatting app (https://www.sdcard.org/downloads/formatter/).

I reinserted the card in the MRCC and tried saving and loading multiply times but the problem remains the same - I can't do neither.

I tried resetting the card once more during the MRCC booting up but again the contents were not cleared from the card.

It seems whatever I do the MRCC has no more access to the SD card.

I have no idea what else to do. I do love the MRCC and I wish it would just work like before...

There's tons of inexpensive class-compliant MIDI interfaces with multiple inputs and outputs (e.g. the Nektar MIDIFLEX4, Miditech MIDIface 2x2 / 4x4 / 8x8, ESI M4U eX and M8U eX), which could be used to add MIDI DIN ports via the USB hub. 

I found nothing in the Compatibility Tracker, has anyone successfully tried any of those with the MRCC?

I have 14 devices in my studio that use a clickable encoder, and all but the MRCC use the click for select/enter. So my muscle memory is trained to click the encoder when I should press enter on the MRCC. And that is not going to change, because I will not interact with the MRCC as often as with the other devices. I'm pretty fast interacting with my gear, but the MRCC throws a spanner in the works, and I find that rather frustrating.

Only in the routing screen the encoder works as I would expect it, that is nice.

A setting that simply turns off the encoder click for "fast navigation" between Activity, Routing, Midi Monitor and the current pages would be very helpful for me, because at least then nothing would happen when I click the encoder, and I then I would remember to press the enter button.

I'd like to be able to select one of the toggle filters, such as clock, rt, note etc the same way as I select routes. 
eg: 

1. I select a input 2
2. I navigate to the clock filter icon
3. all the filtered outputs (not just the current routing) are highlighted using the port indicator leds/buttons
4. I can toggle any output clock filtering for input 2 by selecting the button for that port. 

When I chain one controller from anouther, letting only one be the RT controller, other controllers as slaves, then I make one input port send the RT to everything (except synths with built in sequencers that I don't want to use), and then on the slave controllers i select their inputs and disable RT globably. then i need to configure clockes to send to all buit the originating device, etc.

Over the weekend I spent a couple of hours to wrap my head around the MRCC, so that I can set it up properly. I was sure that I would forget most of the stuff immediately and built myself a 5-page cheatsheet for me to print out in case I need to look up something in a few weeks. 

I thought I'd share it, maybe it is of help to someone out there.

Edit: updated for v1.1.071

Attached Files

  Conductive Labs MRCC Cheatsheet v1.1.071-r1.pdf (Size: 1.38 MB / Downloads: 94)