Hi,

I need to remap incoming CC messages to various different output CC messages.

Upon reading the manual, it would seem that we're limited to 6 possible CC re-maps.

I need more than 6 re-maps in order to control my drum machine's parameters from an external MIDI controller, using at least 16 controllers, i.e. faders, knobs, etc.).

Is there a way I can do this using the MRCC?

Thanks, Mick

I've controlling Pad Position, Strum, Range, and Spread with 4 external encoders over MIDI.

Pad Position and Spread work AOK (CC 28 & 31). Strum and Range (CC 29 & 30) seem to do nothing over MIDI, although they work AOK from the encoders on the NDLR.

Maybe this is a know issue? A bug? Or something I screwed up at my end, for which I will surely be flogging myself (with a wet noodle?)

It would be great if clock from any of the inputs, real or virtual, could be selected as the source for the internal MRCC clock to follow and pass that along to any / all outputs.  Unless I'm mistaken, currently having a single external clock feed to all downstream devices requires it to be routed to each, and that would eat up many of the routings (evidently there is a maximum, which has been mentioned here).

My DAW, as with most, can't follow clock, only generate it, so that would be one source over the virtual USB ports that might be used often, other ones being hardware sequencers and groove boxes, as well as dedicated devices like ERM and Midronome, or even the Kenton Pro CV to MIDI Converter.

Hi,

I recently bought a NDLR with the secret sale.

Unfortunately the device I received does seem to have a hardware problem: knob 4 isn't working. Here's a little movie I made about the problem: https://www.dropbox.com/s/cp4puse0sj6esl7/ndlr.MOV?dl=1

I contact support about this, but did not get an answer. I don't suspect any foul play, maybe my mail would up in spam somehow?

If you're one of the people at Conductive labs reading this, could you please reach out and tell me what to do? Easiest solution would be to ship an other functioning unit to me, but I'd also take a refund if a new unit is not an option.

Hi all.

Sat down for a NDLR Session again and pressed on record.



As always. No script, no plan, just me having instant fun. NDLR and iOS only.

Enjoy, Feedback welcome.

Hey all, I'm getting spun up on the MRCC. Quite a fascinating piece of kit, very nice. To my question....

I have an Erica Synths Zen Delay pedal, and it supports MIDI sync, but it doesn't have dotted 1/8th sync, only 1/4, 1/3, 1/2, x2, x3, x4...

It looks like in the manual of the MRCC, in the arpeggiator section, that the clock can have a time multiple assigned, but that it is similarly limited to the same values as those on the Zen Delay...unless I'm misunderstanding?

Is there any way to send dotted 1/8th clock? (which I believe would be 3/4 of the quarter-note beat..., i.e., 3/4 * 1/4 = 3/16 = dotted 1/8th)

If so, I could get the Zen Delay to do dotted 1/8th...where the streets have no name, hahahaa

Has there been any thought of creating an expander that handles CV input/output?

Hi,

Didn't see anything in the User Manual about running status, but if it's clarified in some other place please link to it. I assume that running status on DIN input won't be a problem, but will it create running status on DIN output?

I've encountered this twice now: for an unknown reason, MRCC stops creating new routes until I power cycle. Routes can still be removed and the interface is otherwise responsive, but new routes simply don't get created.

This is on latest firmware (071)

Seems they are sold out at the moment, I was thinking about buying a MRCC while the sale is on but seems that you can’t buy rack ears at the moment?  Is there an ETA for them to be available again?