Help: Midi mapping to 8 channels

[opabert]

Maybe I do not exactly understand the problem, but here is something:

Set up 6 channel maps.  Page 28 of the current manual.
Create map 1:  position1 - In: 1, Out: 1, Exclusive = Y  (set positions 2,3,4 In to NONE)
Create map 2:  position1 - In: 2, Out: 2, Exclusive = Y  (set positions 2,3,4 In to NONE)
Create map 3:  position1 - In: 3, Out: 3, Exclusive = Y  (set positions 2,3,4 In to NONE)
Create map 4:  position1 - In: 4, Out: 4, Exclusive = Y  (set positions 2,3,4 In to NONE)
Create map 5:  position1 - In: 5, Out: 5, Exclusive = Y  (set positions 2,3,4 In to NONE)
Create map 6:  position1 - In: 6, Out: 6, Exclusive = Y  (set positions 2,3,4 In to NONE)

Then go to the Routing Screen (page 24) and select In port -> out port (1 -> 1) and use the 1st filter.
Then set In port -> Out port (1 -> 2) to use the second filter.  Continue doing that for the first 6 channels.

Thank for help reply,

I found User manual version -v1.1.020.pdf 
Your advice i not sure its on page 25, 26, 27 or 28

USER MANUAL  v1.1.020 page 29
menu MOD - CHAN - MAP 
not see "NONE"
I only see 1 2 3 4 5 6  ALL

I make drawing only to get the idea as part of my setups  using sequencers OXi one and Polyend SEQ total of 16 differ MIDI channels  as 1 to 16 Using many many DIN cables  So you all understand  why i like using the MRCC  with the switch  buttons

.