Motif 1 Velocity Set to Zero on Midi Stop Command - See Short Video

[Jesse Johannesen]

Hi Jesse.

Thanks for coming back!
As this annoyed me big time (yesterday evening) i did some more research...
It is a (i would NOT say „faulty“) plugin i use to route/mirror on/between different MIDI lanes/ports - well, at least in my case.
And thinking about it makes some kind of sense...
To answer your question, Jesse: Yes, original Apple CCK from iPad (12.9“ Pro, 2nd Gen) -> USB Hub -> several Hardwares...

When i use this plugin and stop a running transport this plugin sends these signals to all ports:
2      | Time: 0    | Cable #0 | 0xB0 0x40 0x0  | Control Change (#1)      | Damper Pedal            | Value: 0       
1      | Time: 0    | Cable #0 | 0xB0 0x7B 0x0  | Control Change (#1)      | All Notes Off            | Value: 0

So it „releases“ the sustain pedal on CC64 - which is the same CC as the „Mot 1 Vel“.
When i disable this plugin (or use a script i wrote myself) the „Mot 1 Vel“ change does not occur.

Maybe it is something like that on your end too, @Scotty_123 ?

Frank, oh my god, thank you for digging in deep. This just saved me so much time! It sounds like we should probably just change that CC to another one as that seems like the easiest solution by far. I'll let Steve know.
Scotty is going to be stoked!
Jesse