What is a Remote7 or R7?
07-28-2025, 02:44 PM
You can switch the mode for Remote 7 outputs from "Copy 1-5" to "Remote 1-5" on the Settings screen Page 2/4. It's the last parameter on that page.
In the Quick Start Guide, it is covered under "MRCC Remote 7 Port Extender". In the User Guide, see the section "Settings screen page", R7 Ports.
Also see the "Remote Routing" section on page 14, but it's short; hold the Remote routing button (with the Y to the left of the navigation knob) and select outputs. When the Remote button is pressed, the outputs that are routable will glow yellow. With a Remote 7 in "Remote 1-5" mode, and attached with the appropriate Ethernet cable, there will be 5 yellow lights, and if there are two MRCC's attached to each other, there will be 12 yellow lights.
In the Quick Start Guide, it is covered under "MRCC Remote 7 Port Extender". In the User Guide, see the section "Settings screen page", R7 Ports.
Also see the "Remote Routing" section on page 14, but it's short; hold the Remote routing button (with the Y to the left of the navigation knob) and select outputs. When the Remote button is pressed, the outputs that are routable will glow yellow. With a Remote 7 in "Remote 1-5" mode, and attached with the appropriate Ethernet cable, there will be 5 yellow lights, and if there are two MRCC's attached to each other, there will be 12 yellow lights.