04-28-2025, 08:21 AM
To follow up on this It does sound like a good use case for the Channel to Port Mapping modifier. You can place an instance of the mod in each of the routings to the 4 outputs you mentioned, then set each listening device to listen on CH1. The Mod will look for any MIDI sent to that port on the channel that shares its number, (so if it's output 3, it will only pass MIDI sent to it on CH3), then shifts it to CH1 and sends it out.
To switch which device you are playing from the Polybrute, you would change it to send on the MIDI channel you want to play (ie CH3), and it will be routed to that port (Port 3), and come out on CH1 to the listening device.
If you are still having trouble with the setup send me an email at Support@conductivelabs.com and I can give you a hand.
To switch which device you are playing from the Polybrute, you would change it to send on the MIDI channel you want to play (ie CH3), and it will be routed to that port (Port 3), and come out on CH1 to the listening device.
If you are still having trouble with the setup send me an email at Support@conductivelabs.com and I can give you a hand.