+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: Hardware MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=22)
+--- Thread: MRCC, NDLR, and MIDI channels (/showthread.php?tid=3601)
MRCC, NDLR, and MIDI channels - dreg - 04-14-2025
Hello there, new member and new owner of both NDLR and MRCC.
I would love some help with my configuration.
I have set up my synths midi inputs to be played by the NDLR.
Polybrute channel 1
Minifreak channel 2
Volca FM 2 channel 3
Roland JV-1080 channel 5
NDLR settings sends sequences to these 4 midi channels (MIDI all.)
NDLR is plugged into input 2 of my MRCC. Polybrute is used as a controller for my rack synths, and is plugged into input 1 of MRCC.
However, because of the channel settings I made for the NDLR, the Polybrute can only play JV-1080 if it is set to output on midi channel 5.
I thought that having the MRCC would allow me to route any input to any output without having to play with the channels. The NDLR needs to send to different channels for the sequences to be received by only one synth, but I thought I could also control any synth with my Polybrute via the MRCC.
Is there something I'm not seeing in the MRCC settings that would help me do this? This seems like the exact sort of thing the MRCC is made for. I want to select the destination for the controller via the MRCC, and not by changing the midi output channel on the controller (being the Polybrute in this scenario.)
Thanks for the help!
Dre