What is a Remote7 or R7?
03-12-2025, 11:01 PM
The Remote 7 is an expander for the MRCC which allows you to either copy the first 5 ports output to the DIN outputs of the device (with 2 ports copied to both DIN and 3.5mm, hence 7). It is also possible to send individual routings to the 5 output targets by changing a setting and using the remote (Y guy) routing button on the MRCC.
If you want to connect 2 MRCCs you can with the same shielded cat 6 cable, and you can even use a special splitter to route to both the second MRCC as well as copying ports 1-5 to the Remote 7. We have a bunch of the splitters, and if you buy 2 MRCCs and a Remote 7, hit me up (at support@Conductivelabs.com) and we will chuck one of the splitters in with the order for free.
If you want to connect 2 MRCCs you can with the same shielded cat 6 cable, and you can even use a special splitter to route to both the second MRCC as well as copying ports 1-5 to the Remote 7. We have a bunch of the splitters, and if you buy 2 MRCCs and a Remote 7, hit me up (at support@Conductivelabs.com) and we will chuck one of the splitters in with the order for free.