MRCC Firmware Release 1.1.095

[Royce]

MRCC_v1.1.071 Official Release

Available on the Conductive Labs MRCC Firmware Download Page. 
Thank you to our forum members that helped with testing beta releases! 

Fixed in this version
Corrupt text on the Routing Matrix screen in some circumstances, such as when using the navigation buttons to "zoom in" on virtual port routings, then pressing an input or output button.

Release notes from the most recent Beta releases (older release notes available at the link):

MRCC_v1.1.068

Features:

1. Added current Preset Name on Load/Save screen
   
2. Added screen idle timeout to prevent OLED burn-in when the MRCC is left on a lot. The "Screen Off" time can be set on Settings page 2. The screen will sleep when MRCC is "idle" (no MIDI notes). However, the idle timeout reset ignores Clock, ActiveSensing or TimeCodeQuarterFrame MIDI messages and will timeout despite those messages being present. Tap the green button or any other button to turn the screen back on.
   
3. In Channel Map modifier: added a new Chan Source = "-" (none) in lines 2-4. This enables a bunch of Channel mapping possibilities. For example, if the desire is to only map a single channel, set Exclusive to Y, set Channel map line 1 to the channel to map from, and Out to the channel to map to. Set channel map lines 2, 3 and 4 to none (-). 
   
4. Removed the SHIFT+ required in SAVE / LOAD 'ing presets (no safety on the preset overwrite!!!). 
   

BUG FIXES:

1. Major overhaul of System Exclusive (SysEx) message handling. MRCC should be able to handle any length data to all possible out ports including MRCC to MRCC & MRCC to Remote 7. Please note: It is possible to overrun the MRCC's internal buffers when sending large SysEx files from very fast USB to very slow 5 pin DIN outputs. The sending software should throttle the speed it sends SysEx. Also note, if sending large SysEx files, be sure to temporarily turn off any other MIDI data sources. Once the internal buffers are full, MRCC will block MIDI data on merged inputs, but better chance of success if its not having to handle clock and other messages while the large transfer is happening.
   
2. The last selectable preset name was 128 (F25) - should have been 127 (F24)
   
3. Fix some Preset save issues. If you experienced an issue where after saving a patch, it changed back to Red from Green, this should fix it.
   
4. Activity Screen always shows the correct Preset Label
   
5. When routing remotely and holding the "Y" 5-Pin #1 is not showing MIDI activity
   
6. Fixed some User Label Save/Delete/Assign issues. 
   

MRCC_v1.1.052_04-04-2022

BUG FIX:
Program Change messages fail to route when on same port as MRCC MIDI Cntrl, despite being on a different channel.

Hi Darryl.
the download link on that page gives "mrcc_v1.1.071_03-08-2023/"  which of course won't load.

Previous firmware downloads where php coded.

All the best
Royce