02-09-2022, 09:38 AM
(02-09-2022, 09:08 AM)Jesse Johannesen Wrote: Thanks for reporting the devices you've tried as well as the results. I've taken note to add them to the compatibility tracker for future reference. In the mean time, as I mentioned in our email, the devices which are not USB compatible should have no trouble when used with a din connection. Can you please try connecting the majella again and take note of what happens with the MRCC during the attempt to boot? If you can take a picture of the state it gets stopped at and send it to me via email at Support@conductivelabs.com, I'm not certain what that situation might be and would love to get to the bottom of it.
I know you know, and I hate to be constantly picking at the same scab, but since the MRCC is an asymmetric patchbay (6 in, 12 out), inputs are at a premium in most people's setups. Being able to dedicate 4 USB devices alleviates that stress somewhat, so the more better the USB stuff works, the easier it is to set up a config and just leave it. Of course that also applies to any/all devices that need to use sysex for patch edits, dumping banks/edits to a computer, being controlled by remote hw editors/controllers and so on.