Only 4 synths on the NDLR

[Jesse Johannesen]

4. Sync a drum machine to Start/Stop to add a rhythm section.
5. Sync another sequencer to Start/Stop to add control of 16 more synths.

I might have skipped this in the manual, could you mention quickly how this is done? Thank you!

Here's a rundown on how you might set this up. 

1. enable midi clock out in the global menu by holding [shift+MENU] during power up, then press the motif 1 button change the value to enable (if it's not already set) then press panic/motif1/2 button at the top to exit and continue bootup

2. go to settings menu 1 and the bottom right corner option is for midi transport (start/stop). choose which outputs you want to send those out of here.

3. hook up a device via midi and make sure it's set to receive external clock and transport in via midi. 

4. When you hit play on one of the parts, the chained device should hear the play signal and will start at the same time, at the clock tempo the NDLR is sending. This could be something like an electribe, SQ1, Volca beats (jeez i must be some kind of Korg fanboy, but it should work for most stuff if it has an internal sequencer and midi in) etc. 

Quick Note: just be sure your device isn't also listening for midi notes on one of the channels you're sending parts out, unless that's what you're into.  
Cheers,
Jesse