Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CME WIDI
#11
(03-07-2022, 07:15 PM)Jesse Johannesen Wrote: Sorry I missed this one, I think Darryl was sent a Widi from those folks, I'll ask him!

(03-07-2022, 07:15 PM)Jesse Johannesen Wrote: Sorry I missed this one, I think Darryl was sent a Widi from those folks, I'll ask him!

Darryl says"...we've tried the WIDI Master DIN jack, WIDI Jack, and WIDI Bud Pro. The Bud Pro works in the USB host port and is a good way to connect to an iPad."

Hello! Very new here, because I'm getting my MRCC wired up and following the advice of this forum, have been trying desperately to get the WIDI Bud Pro to work on the MRCC. I can get the bud to work when connected to a computer, but it doesn't seem to ever get fully going on the MRCC...

Reading the manual (https://www.cme-pro.com/wp-content/uploa...iew_en.pdf), I see the following phrase:
"It can be used as a USB device to add Bluetooth MIDI function to a computer or smart mobile device with USB socket, and the MIDI device with a USB Host socket." So I'm wondering if there's a way to have the MRCC treat the MIDI Host Ports as Device ports? Or if there are any specific settings that have been used during testing to make this function.

Please let me know, since this not working is a pretty annoying blow otherwise!
Reply
#12
Can you please give me some details of how you're trying to connect and utilize the device, and how you are determining whether it is working? I don't have the device to test with, but Darryl reported not having any difficulty setting it up, so hopefully that means we should be able to as well.

There is no way to set up the Host ports to behave as device ports though, so that option is out.
Reply
#13
(07-26-2023, 11:30 AM)Jesse Johannesen Wrote: Can you please give me some details of how you're trying to connect and utilize the device, and how you are determining whether it is working? I don't have the device to test with, but Darryl reported not having any difficulty setting it up, so hopefully that means we should be able to as well.

There is no way to set up the Host ports to behave as device ports though, so that option is out.

Actually! It turns out that I was misunderstanding the Bluetooth connectivity of the CME devices, and I needed to disconnect and forget them from my phone or they wouldn't connect at all.

I can also confirm that the WIDI Bud Pro works perfectly in the MRCC!
Reply
#14
Great news, thanks for the update!
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)