Yesterday, 12:20 PM
Hello I am a newbee with the MRCC and got my routings working so far. With the sysex I do not get warm with this device but maybe you have an idea to solve my issue.
Setup:
- v1.1.075
- Laptop Windows11
- microKORG S with SoundEditor
- some Audio interfaces with DIN MIDI ports
The soundeditor is quite old but works fine with my focusrite device or tascam midi interfaces. Actually I bought the MRCC mainly not to recable everything and also use the sysex librarian.
I have read about using lower ports for that so I have connected the USB-B PC to Windows and connected:
- 1 -> P01
- P01 -> 1
When loading all patches with the SoundEditor it works in 1 of 10... cases. It stops in the communication as you can see in the fotos because the patch names are not there but the number of patches. I have restarted the program, restarted the MRCC, restarted the microKORG and it seems there is no dependency. The microKorg shows that it is transmitting data, and also on main MRCC screen there is a green light in the little squares. On the MRCC Routing page I can see some symbols: 0>sX. I have tried also microKorgs external MIDI clock, because with internal sysex seems not to work at all.
There is no other routing then this for the microKorg, and I have saved sysex config in "User 2".
What is also funny is that the more I execute the SoundEditor the higher the current MRCC Preset that is selected but not loaded (because red and not saved yet) when I move to the menu.
I definitely do not have changed the preset with the MRCC GUI.
I also have a WIDI jack bluetooth device connected to MRCC IN2 and OUT2 and Windows 11 bluetooth. The soundeditor crashes if I select the WIDI jack so the MRCC does not just route the communication between WIDI and microKorg. But probably this is another issue.
Do you have an idea what to try to get sysex properly working? Thanks a lot in advance!
Setup:
- v1.1.075
- Laptop Windows11
- microKORG S with SoundEditor
- some Audio interfaces with DIN MIDI ports
The soundeditor is quite old but works fine with my focusrite device or tascam midi interfaces. Actually I bought the MRCC mainly not to recable everything and also use the sysex librarian.
I have read about using lower ports for that so I have connected the USB-B PC to Windows and connected:
- 1 -> P01
- P01 -> 1
When loading all patches with the SoundEditor it works in 1 of 10... cases. It stops in the communication as you can see in the fotos because the patch names are not there but the number of patches. I have restarted the program, restarted the MRCC, restarted the microKORG and it seems there is no dependency. The microKorg shows that it is transmitting data, and also on main MRCC screen there is a green light in the little squares. On the MRCC Routing page I can see some symbols: 0>sX. I have tried also microKorgs external MIDI clock, because with internal sysex seems not to work at all.
There is no other routing then this for the microKorg, and I have saved sysex config in "User 2".
What is also funny is that the more I execute the SoundEditor the higher the current MRCC Preset that is selected but not loaded (because red and not saved yet) when I move to the menu.
I definitely do not have changed the preset with the MRCC GUI.
I also have a WIDI jack bluetooth device connected to MRCC IN2 and OUT2 and Windows 11 bluetooth. The soundeditor crashes if I select the WIDI jack so the MRCC does not just route the communication between WIDI and microKorg. But probably this is another issue.
Do you have an idea what to try to get sysex properly working? Thanks a lot in advance!