Transpose stops working after exactly 15 notes

[johnleborgne]

Hello,

I have the same problem.
MRCC firmware is 1.1.075.

Here is my test setup n°1.

Sender : Keyboard : Novation Launckey 25 MK3
Receivers  : 
 - Elektron Analog Ryhtm : T1 with -12
 - Syntakt : T2 with +12
 - Digitone : T2

Transpose does not work more then 10 times in my case.

The Launckey does not send midi off message but midi note on vel 0 instead.
So I count 5 keyboard note play exactly to have transpose shuts down on the MRCC.

This seems to be the major problem with the MRCC
it's not the first problem I have with MRCC that seems related to the "non note off midi msg".


Here is my test setup n°2. (no more Launckey)

Sender : Digitone
Receivers  : 
 - Elektron Analog Ryhtm : T1 with -12
 - Syntakt : T2 with +12

Here, I can play the Digitone keyboard with no transposition problem for a few times but...
Another one show up.

After a few time, MRCC seems to send the base note to the Analog & Syntakt when Digitone send the midi note off msg.
=> these notes never stops because the Analog & Syntakt never receives note off msg.
Si I've got to use the "double stop" on the two to kill the sound.

Best

John