Knob is stiff while turning
03-19-2025, 11:18 AM
Not in front of mine, but it sounds like maybe the knob was fastened off-center. Look at it from the side to see if one part of the knob is lower than the other.
I forget if it is a push-on or a set-screw. If a push on, the actual pot shaft may be bent. If a set screw, loosen the set screw, readjust the knob, and tighten.
I forget if it is a push-on or a set-screw. If a push on, the actual pot shaft may be bent. If a set screw, loosen the set screw, readjust the knob, and tighten.