07-28-2024, 05:49 AM
I have encountered a bug on 1.1.075.
I am running two MRCC's and I have a setup where I have two devices setup through USB A1 on MRCC 1 and USB B1 on MRCC2.
USB A1 on MRCC1 is running to an xpander which is sending midi in/out to a synth. MCRR2 USB B1 is hooked to USB, clock is filtered out of USB B1 input, and notes are coming from MRCC2 to MRCC1.
I am getting a scenario where note ons are being sent but all note offs are not being received on the destination MRCC1. I have forwarded notes to MRCC2 PC1 and am reading them on midi monitor in Mac. When the synth sounds stuck notes, I have counted the note on/offs forwarded from MRCC2 USB B1, and then from MRCC1 USBA1. When the notes travel from one MRCC to another, the note offs are not all delivered. When I move the sending device directly to MRCC1 where the other destination synth is at, the note offs get delivered.
Other notes are MRCC1 and 2 has a lot of routings between them, I suspect this is happening due to cpu/number of routings. When I disable some routings it seems to happen less but still happens even with just one routing.
Clock is sent from MRCC1 to 2 and is filtered out of any input that is connected, I have for sure filtered out clock from all devices except the single sending device. Let me know if I can help on this. again, may notifications from this forum are not getting delivered. So I will send this as email also
I am running two MRCC's and I have a setup where I have two devices setup through USB A1 on MRCC 1 and USB B1 on MRCC2.
USB A1 on MRCC1 is running to an xpander which is sending midi in/out to a synth. MCRR2 USB B1 is hooked to USB, clock is filtered out of USB B1 input, and notes are coming from MRCC2 to MRCC1.
I am getting a scenario where note ons are being sent but all note offs are not being received on the destination MRCC1. I have forwarded notes to MRCC2 PC1 and am reading them on midi monitor in Mac. When the synth sounds stuck notes, I have counted the note on/offs forwarded from MRCC2 USB B1, and then from MRCC1 USBA1. When the notes travel from one MRCC to another, the note offs are not all delivered. When I move the sending device directly to MRCC1 where the other destination synth is at, the note offs get delivered.
Other notes are MRCC1 and 2 has a lot of routings between them, I suspect this is happening due to cpu/number of routings. When I disable some routings it seems to happen less but still happens even with just one routing.
Clock is sent from MRCC1 to 2 and is filtered out of any input that is connected, I have for sure filtered out clock from all devices except the single sending device. Let me know if I can help on this. again, may notifications from this forum are not getting delivered. So I will send this as email also