02-23-2024, 07:45 AM
(This post was last modified: 02-23-2024, 07:45 AM by Jesse Johannesen.)
I'm away from my NDLR at the moment, but it should be possible to test this with the gear you mentioned. I can take a look at mine in a bit and see if my results vary.
If you have the MRCC handy, you can connect the DIGITAKT through the MRCC to the NDLR (use DIN for the DIGITAKT), then route them, and open the MIDI monitor and navigate to the play button and press the blue select button to turn the MIDI monitor on. Try your experiment, starting and stopping the DIGI and see if clock continues to be sent.
When the NDLR is set to external clock, it literally does nothing when it stops receiving clock, it's like a big jack in the box waiting for the clock to crank it along, so it sounds like that's what's happening, but let me know what the test shows.
If you have the MRCC handy, you can connect the DIGITAKT through the MRCC to the NDLR (use DIN for the DIGITAKT), then route them, and open the MIDI monitor and navigate to the play button and press the blue select button to turn the MIDI monitor on. Try your experiment, starting and stopping the DIGI and see if clock continues to be sent.
When the NDLR is set to external clock, it literally does nothing when it stops receiving clock, it's like a big jack in the box waiting for the clock to crank it along, so it sounds like that's what's happening, but let me know what the test shows.