01-22-2024, 05:43 PM
OK I worked with a friend who has Logic and we were able to figure something out, hopefully this solves your issue:
On each instrument's MIDI track:
in their inspector (which is the channelstrip section on the left) in the MIDI effect drop-down menu you need to select the "scripter" effect.
This will load a setting called “factory default” which passes every channel, we need to change this to the first selection from the drop-down, selecting "channel filter". This defaults to pass only channel 1. For each instrument's track we need to do this and select the correct channel for that device.
Do this for each channel then make sure the recording “arm” selector is lit red for all of them.
On each instrument's MIDI track:
in their inspector (which is the channelstrip section on the left) in the MIDI effect drop-down menu you need to select the "scripter" effect.
This will load a setting called “factory default” which passes every channel, we need to change this to the first selection from the drop-down, selecting "channel filter". This defaults to pass only channel 1. For each instrument's track we need to do this and select the correct channel for that device.
Do this for each channel then make sure the recording “arm” selector is lit red for all of them.