11-18-2023, 11:32 AM
(This post was last modified: 11-18-2023, 12:30 PM by autopoiesis.
Edit Reason: formatting, number of USB devices (4 not 3)
)
FWIW, the latest (Version: 2.1.0) firmware for mioXL/XM - https://cdn.iconnectivity.com/firmware/n..._notes.txt states:
Date: 2023-08-21
1. Added support for hosting Roland devices (MIDI only, not audio) that are not using class compliant USB MIDI descriptors.
---8<---
After this upgrade, the NDLR appeared (as four separate USB devices/ports) in my mio, from which it was being powered, but connected by DIN.
Still DIN-connected, and USB not yet tested, but might be a ray of hope if it actually works. I don't know whether the latest NDLR patch (v1.1.086 for me) changes anything for folks who have non-mio iConnectivity devices, like the MIDI4+ mentioned by the OP in this thread.
(Crossposted from topic "NDLR USB not recognized by iConnectivity MIDI4+ host" elsewhere in here.)
HTH,
auto
Yup, with NDLR 1.1.079 + mioXL with 2.1.0, all four NDLR USB ports lighting up in MIDI-OX, via RTP-MIDI (I don't use USB for MIDI). All looks good.
Same after applying the NDLR 1.1.086 patch.
Crossposting as previously; seems like this is a fix (and I've gained a precious MIDI in, too).
Cheers,
[happier] auto
Date: 2023-08-21
1. Added support for hosting Roland devices (MIDI only, not audio) that are not using class compliant USB MIDI descriptors.
---8<---
After this upgrade, the NDLR appeared (as four separate USB devices/ports) in my mio, from which it was being powered, but connected by DIN.
Still DIN-connected, and USB not yet tested, but might be a ray of hope if it actually works. I don't know whether the latest NDLR patch (v1.1.086 for me) changes anything for folks who have non-mio iConnectivity devices, like the MIDI4+ mentioned by the OP in this thread.
(Crossposted from topic "NDLR USB not recognized by iConnectivity MIDI4+ host" elsewhere in here.)
HTH,
auto
(11-18-2023, 11:32 AM)autopoiesis Wrote: FWIW, the latest (Version: 2.1.0) firmware for mioXL/XM - https://cdn.iconnectivity.com/firmware/n..._notes.txt states:
Date: 2023-08-21
1. Added support for hosting Roland devices (MIDI only, not audio) that are not using class compliant USB MIDI descriptors.
---8<---
After this upgrade, the NDLR appeared (as four separate USB devices/ports) in my mio, from which it was being powered, but connected by DIN.
Still DIN-connected, and USB not yet tested, but might be a ray of hope if it actually works. I don't know whether the latest NDLR patch (v1.1.086 for me) changes anything for folks who have non-mio iConnectivity devices, like the MIDI4+ mentioned by the OP in this thread.
(Crossposted from topic "NDLR USB not recognized by iConnectivity MIDI4+ host" elsewhere in here.)
HTH,
auto
Yup, with NDLR 1.1.079 + mioXL with 2.1.0, all four NDLR USB ports lighting up in MIDI-OX, via RTP-MIDI (I don't use USB for MIDI). All looks good.
Same after applying the NDLR 1.1.086 patch.
Crossposting as previously; seems like this is a fix (and I've gained a precious MIDI in, too).
Cheers,
[happier] auto