Older Firmware Releases

[Dark Waves]

To follow up on previous posts here, I'm still experiencing identity confusion in Windows 10 with my two MRCCs.  Currently, as of March 19, I'm on the latest FW on both, v1.1.071, and I have been keeping up with each beta over time.  For the most part, device recognition often persists for a few sessions, but not always (if I had to estimate, maybe 2 3rds of the time.  Sometimes rebooting the PC helps to return to the last set of port names, but not always, and just closing and relaunching the DAW,  Studio One, has no effect.  My usual practice is to have the MRCCs and all other peripherals booted and connected prior to starting the computer, as this tends to give the best chance for consistent results.

I hope these images will show up, they show how the units are differentiated at different times, and were all taken in the last couple of weeks, since updating the last time.  In case they aren't viewable, the names vary between MRCC / MRCC (2),  MRCC-A / MRCC-A (2), and MRCC-B / MRCC-B (2).  Previously there had also been other variations.  To clarify, all of these changes are functional if selected in the DAW, but this would be quite tedious as each device using a virtual port then must individually have an assignment made to match the current set of choices.

Edit for detail: The names MRCC-A and B are what I've entered on the units under "PC Name" on page 4/4 of settings, which is how they've been set for a long time.  What's picked up by the computer is never both of these together, just one of them, or without a suffice, with the (2) assigned instead to one.





https://www.dropbox.com/s/174ryob41znjb4....jpeg?dl=0
https://www.dropbox.com/s/q1nebucc3od429....jpeg?dl=0
https://www.dropbox.com/s/ncggr0idftlxjm....jpeg?dl=0