04-17-2023, 08:37 PM
(This post was last modified: 04-17-2023, 09:07 PM by Jesse Johannesen.)
If I understand your question correctly you should be able to turn on the Polychaining feature in the settings menu and choose how many channels you want (1-4) however the channels will be sequential starting with the Pad channel number, so it's a good idea to make sure that the Pad channel is set to a number where there are A) 3 more numerically above it, and B) that these are not already being used as Motif or Drone part channels.
This feature just hockets notes to each channel in the order they come in though, so it's not going to get overly fancy as far as sending 3rd off to specific voices, but it may be worth a look. It's been long enough since I've used the feature though that I don't remember if there are any gotchas that would prevent you from using more than 4 voice pad settings. I will mess around with it and see what I can discover.
Here is a link to my previous post about the spread settings:
https://conductivelabs.com/forum/showthr...d+settings
This feature just hockets notes to each channel in the order they come in though, so it's not going to get overly fancy as far as sending 3rd off to specific voices, but it may be worth a look. It's been long enough since I've used the feature though that I don't remember if there are any gotchas that would prevent you from using more than 4 voice pad settings. I will mess around with it and see what I can discover.
Here is a link to my previous post about the spread settings:
https://conductivelabs.com/forum/showthr...d+settings