Clock voltage
04-15-2023, 10:08 PM
The reason that the limit is 5V is that the Power is derived from the USB power which is a 5V convention. It wasn't a choice designed to limit options, but a limit imposed by options taken in the design. You may be able to whip up a simple voltage divider with a couple of Resistors. Here is a link to an example in a circuit simulator:
https://tinyurl.com/2y5fp4ez
You could either get a couple of jacks and make this or cut a wire and strip the leads and connect them to a strip board layout. I would honestly just use the attenuator, and just put a piece of tape on the knob if it had you feeling uneasy. It would be easier and probably less of a chance to mess it up.
https://tinyurl.com/2y5fp4ez
You could either get a couple of jacks and make this or cut a wire and strip the leads and connect them to a strip board layout. I would honestly just use the attenuator, and just put a piece of tape on the knob if it had you feeling uneasy. It would be easier and probably less of a chance to mess it up.