Older Firmware Releases

[Darryl]

Making this separate post to trigger notification for those that follow this forum.

There's a new beta firmware 1.1.068 with the following enhancements. It's in the first post of this forum. https://conductivelabs.com/forum/showthr...p?tid=1583

Features:

1. Added current Preset Name on Load/Save screen
   
2. Added screen idle timeout to prevent OLED burn-in. The "Screen Off" time can be set on Settings page 2. The screen will sleep when MRCC is "idle" (no MIDI notes). However, the idle timeout reset ignores Clock, ActiveSensing or TimeCodeQuarterFrame MIDI messages and will timeout despite those messages being present. Tap the green button or any other button to turn the screen back on.
   
3. In Channel Map modifier: added a new Chan Source = "-" (none) in lines 2-4. This enables a bunch of Channel mapping possibilities.
   
4. Removed the SHIFT+ required in SAVE / LOAD 'ing presets (no safety on the preset overwrite!!!). 
   

BUG FIXES:

1. Major overhaul of System Exclusive (SysEx) message handling. MRCC should be able to handle any length data to all possible out ports including MRCC to MRCC & MRCC to Remote 7. Please note: It is possible to overrun the MRCC's internal buffers when sending large SysEx files from very fast USB to very slow 5 pin DIN outputs. The sending software should throttle the speed it sends SysEx. Also note, if sending large SysEx files, be sure to temporarily turn off any other MIDI data sources. Once the internal buffers are full, MRCC will block MIDI data on merged inputs, but better chance of success if its not having to handle clock and other messages while the large transfer is happening.
   
2. The last selectable preset name was 128 (F25) - should have been 127 (F24)
   
3. Fix some Preset save issues. If you experienced an issue where after saving a patch, it changed back to Red from Green, this should fix it.
   
4. Activity Screen always shows the correct Preset Label
   
5. When routing remotely and holding the "Y" 5-Pin #1 is not showing MIDI activity
   
6. Fixed some User Label Save/Delete/Assign issues.