12-15-2022, 08:04 PM
So I can think of one easy way, but it's a bit of a hack to do it.
1. Send the clock and trigger into the MRCC from our source lets say DIN1_IN for the sake of this experiment.
2. Route that to DIN1_Out and DIN2_Out
3. On routing DIN1_In to DIN1_Out block all MIDI except Start Stop (transport) by placing MIDI filters on this routing.
4. On routing DIN1_In to DIN2_Out block Start Stop (Transport) with a filter
5. Use a short MIDI cable to physically route DIN1_Out into DIN2_in
6. Route DIN2_in to DIN2_out
7. When playing keep DIN2_In selected and once you've started the bandmates downstream. press the button on DIN2_Out to unroute it. Press it again to reroute it when you want to send Transport again. Clock will still continue regardless, as will anything else not filtered.
1. Send the clock and trigger into the MRCC from our source lets say DIN1_IN for the sake of this experiment.
2. Route that to DIN1_Out and DIN2_Out
3. On routing DIN1_In to DIN1_Out block all MIDI except Start Stop (transport) by placing MIDI filters on this routing.
4. On routing DIN1_In to DIN2_Out block Start Stop (Transport) with a filter
5. Use a short MIDI cable to physically route DIN1_Out into DIN2_in
6. Route DIN2_in to DIN2_out
7. When playing keep DIN2_In selected and once you've started the bandmates downstream. press the button on DIN2_Out to unroute it. Press it again to reroute it when you want to send Transport again. Clock will still continue regardless, as will anything else not filtered.