08-09-2022, 11:51 AM
Answer is -- yes it works.
Couple Tricks --
Routing Synth out through MRCCs -
hold down the 'Y' button on Secondary MRCC.
Select Port 4 (input), press AND HOLD PC out button (LED should be yellowish) -- ALSO press another output port (1-12). This will be the port the DAW sees.
Release 'Y' button. No output LEDs should be on.
Hold Y button again - PC Out LED should be on.
You should be able to play the synth and the DAW should see the data.
Return path:
On the Primary MRCC Select PC in port, - make sure to choose the same port number (1-12) that the DAW is transmitting on
Press and hold the Y button, select output port 10.
Play the DAW recording and the synth should see it.
Couple Tricks --
Routing Synth out through MRCCs -
hold down the 'Y' button on Secondary MRCC.
Select Port 4 (input), press AND HOLD PC out button (LED should be yellowish) -- ALSO press another output port (1-12). This will be the port the DAW sees.
Release 'Y' button. No output LEDs should be on.
Hold Y button again - PC Out LED should be on.
You should be able to play the synth and the DAW should see the data.
Return path:
On the Primary MRCC Select PC in port, - make sure to choose the same port number (1-12) that the DAW is transmitting on
Press and hold the Y button, select output port 10.
Play the DAW recording and the synth should see it.