MRCC Pre-purchase Questions

[ekkomouse]

1. Does the mrcc have the ability to remap poly aftertouch to channel pressure and vice versa? trying to fix an issue with a synth reading only one or the other from various midi controllers.
   
2. Will it pass through, besides sending the MIDI data, is also transmitting - CDC (serial) and Raw HID. Related to use with Polyend Play see link: https://help.polyend.com/431975-My-iConnectivity-MIDI-USB-hub-is-not-recognising-my-Polyend-instrument-why
   
3. When interfacing with the computer, am I able to name the inputs and outputs on the MRCC device and the names will show up in audio/midi setup on Mac, therefore being passed onto DAW's? 
   
4. Am I able to setup an RTP Midi network? Not so important but coming from MioXL where I have one device working through RTP currently
   
5. Does the device allow for connection to iOS/iPad midi devices? I plan to add an iPad on next update, not as familiar with how these will interface
   
6. On virtual inputs on host USB ports, does that mean we can plug a USB hub for access to the 4 inputs? Read FAQ and it says not really, I'm trying to understand how the 4 virtual inputs per host port work, maybe get an example use case?
   
7. Can the MRCC receive midi clock from a connected device then translate or sync its internal clock to send the same clock out of its cv clock output?
   
8. If I need to expand with a second unit, would I configure advanced functions from one screen or from both separately?
   
9. Will the virtual midi ports seen by a Mac audio/midi setup be available to route software and be viewed as additional input/outputs on the device for various saved routings? Example currently is I have to use midi input/output in settings on Komplete kontrol keyboard software to translate incoming MPE from a roli seaboard to get it to send the Roli to other external synths, currently routed through a MidXL, the Komplete kontrol is receiving from itself, the roli and a polyend play to route to other devices without opening a DAW.
   I know its a lot of questions, if anyone can answer one or two, I appreciate everyone's time.  Probably ordering one anyway to test but would be nice to know these in advance.
   
10. Can I use a basic trs mini cable to transmit trs midi from one device to trs midi on the MRCC? Any special cable requirements for type a vs b? Use case is a launchpad type controller with trs output going direct to trs input without those trs to midi converter cables.