05-17-2022, 10:16 PM
So first of all if you have the ARP being sent you don't want the MIDI notes to be sent too, because they will get doubled up so I think setting:
input 1 ch 1 as the ARP listening port for ARP 1 and Out Port1 Ch 1 as the target, &
input 1 ch 2 as the ARP listening port for ARP 2 and Out Port2 Ch 2 as the target is all good.
So then no MRCC routing between those ports, and now to send CC, I believe you will want to send the CC number 23 to Input 1 Ch1 to change the ARP type of ARP 1, and sending a value of 2 should set it to "ping pong inclusive" mode, for instance.
For Synthesizer number 2, you would send MIDI CC 23 to Input 1 CH 2. If you try this and it's not working let me know and I would be happy to test it out on my end.
Jesse
input 1 ch 1 as the ARP listening port for ARP 1 and Out Port1 Ch 1 as the target, &
input 1 ch 2 as the ARP listening port for ARP 2 and Out Port2 Ch 2 as the target is all good.
So then no MRCC routing between those ports, and now to send CC, I believe you will want to send the CC number 23 to Input 1 Ch1 to change the ARP type of ARP 1, and sending a value of 2 should set it to "ping pong inclusive" mode, for instance.
For Synthesizer number 2, you would send MIDI CC 23 to Input 1 CH 2. If you try this and it's not working let me know and I would be happy to test it out on my end.
Jesse