05-09-2022, 03:30 AM
To add a little of my experience here (have communicated much of it elsewhere), on my Win 10 PC using Studio One 5, the FW ...044 was allowing the system to recognize 2 sets of 12 ports, A and B, for my two routers, so long as they were powered on first. In ...51 that changed to one set of 24 ports (all 'B') that stayed consistent enough to use repeatedly, only needing to change assignments once for the new scheme. As of ...52, the ports generally are the same as in ...51, except not every time, probably 75%, give or take. When the DAW loads with errors due to changed ports after initial power-up, a reboot of the PC has consistently solved the confusion and reverted the ports to the regular (for now) 1-24B scheme.