03-06-2022, 07:32 PM
Looking at the manual for the SQ-64:
The Global settings menu on SQ-64 lets you turn USB ports on and off, so make sure the ones you want are on.
If you are powering SQ-64 from the MRCC host port, you must setup the SQ-64 "Bus power" parameter to "500mA".
There is a "master/slave" setting in Global menu for setting SQ-64 to sync to clock.
Korg uses MIDI Type-A 3.5MM jacks, which can plug into the MRCC A jacks with a 3.5Mm TRS cable.
The Global settings menu on SQ-64 lets you turn USB ports on and off, so make sure the ones you want are on.
If you are powering SQ-64 from the MRCC host port, you must setup the SQ-64 "Bus power" parameter to "500mA".
There is a "master/slave" setting in Global menu for setting SQ-64 to sync to clock.
Korg uses MIDI Type-A 3.5MM jacks, which can plug into the MRCC A jacks with a 3.5Mm TRS cable.