02-14-2022, 03:09 AM
(This post was last modified: 02-14-2022, 03:19 AM by bangkokbanger.)
(02-14-2022, 02:30 AM)oldgearguy Wrote: You are sending 2 streams to the same drum machine (Motif 1 and 2). Both streams have the clock on them and I think that is what is causing the problem.
Simple test - unplug (or mute) the Channel 3 or 4 stream and it should be fine.
If that works, you either need to add a filter box on one of the streams, set up something inside the drum machine parameters to limit which channels it uses for clock input.
Or not use the same machine for both motifs.
There's other even more convoluted ways around it, but they involve additional splitters/merge boxes or MIDI patchbays that can also filter.
yes this is of course correct
Only issue if i remove channel 3 and 4 then im no longer using the drum machine/ groovebox (mc707) which als acts as my mixer as its got loads of channels and faders which i really want to use as well as its synth engine and drum tracks!
i have 1 midi spltter box (2 in and 3 out) already, and ive got another (midi through and merge box) which im hoping might work
https://www.thomann.de/gb/miditech_midi_thru_filter.htm
i wonder if this would be the solution?