11-15-2021, 01:49 AM
(06-22-2021, 07:46 PM)Darryl Wrote:
MRCC_v1.1.041_11-12-2021
FEATURE:
1) Completed! (MAYBE!?!?!) MRCC "USB PC Name" can be augmented to MRCC-A to MRCC-Z, or orig MRCC (see Setting Menu 4).
This is useful when more than one MRCC is connected to your PC.
We have NOT been able to get Win10 to correctly identify the unique USB Friendly Names and USB Serial Numbers when cold booting
with two MRCCs connected. We can clearly see the unique info in Device Manager. NOTE: If you turn on the MRCCs after booting
then everything seems to be clearly identified as unique. Any feedback on why would be awesome!
Feedback: Having updated to this latest version, the behavior I'm getting is slightly different from before.
My experience with two routers: so I went from 1.1.035 to the current beta, 1.1.041, and named my #1 unit MRCC-A, and the #2 MRCC-B. My procedure is typically to turn on the PC, then start the MRCCs in order, and then start the DAW, Studio One on Win 10. Before now, the selections in the DAW dropdowns for routing were along the lines of MIDIIN1 MRCC and MIDIIN1 MRCC (2), up to MIDIIN12 (MRCC (1) or (2)). Now they show from MIDIIN1 (MRCC-B) to MIDIIN24 (MRCC-B). Essentially, B 1-12 are my unit 1 / A, and B 13-24 are for unit 2 / B. Example, port 3 on my second unit is selected using port 15 in the list
However, if I power on the routers prior to the PC, the assignments in the DAW are reversed, reading MIDIIN1 (MRCC-A) to MIDIIN24 (MRCC-A), and what was 1-12 in the prior scenario is now 13-24 and vice versa. I don't know if the exact combination stays consistent all the time, but at least so far this has been the result