We've just ordered samples of this accessory for testing and want to gauge interest to help us decide how many to make. Its a 4 DIN input and 1 DIN output expander for MRCC. It uses an MRCC USB host port, and each DIN port is automatically connected to the USB host port's 4 ins and 1 out USB virtual MIDI ports. An MRCC can host 4 of these, if you don't mind giving up the USB host ports.
You could use a short USB cable to have it close to MRCC, or a longer cable to get it to where you need more I/O. USB 2.0 has a cable limit of about 5 meters, or you could use an active USB extension cable and go further.
Besides acting as a DIN (and 3.5mm type A jack) expander for MRCC, it can be used with your PC as a 4 in to 1 out MIDI interface. Or, use it as a USB powered 4 to 1 MIDI merger.
The street price will be in the ballpark of $80 USD, but we haven't bottomed out on the full cost yet so it could go up or down a bit.
We've had a fairly high attached rate for the Remote 7 to add outputs. Would this be just as interesting? Do you need it? Please comment below
You could use a short USB cable to have it close to MRCC, or a longer cable to get it to where you need more I/O. USB 2.0 has a cable limit of about 5 meters, or you could use an active USB extension cable and go further.
Besides acting as a DIN (and 3.5mm type A jack) expander for MRCC, it can be used with your PC as a 4 in to 1 out MIDI interface. Or, use it as a USB powered 4 to 1 MIDI merger.
The street price will be in the ballpark of $80 USD, but we haven't bottomed out on the full cost yet so it could go up or down a bit.
We've had a fairly high attached rate for the Remote 7 to add outputs. Would this be just as interesting? Do you need it? Please comment below