Hi...my NDLR x 2 FW 1.073 is crashing alot

[Ghostz_of_Moar]

So I switched to using one midi input(midi in B) and it’s still happening as I use the octatrack mk1 to sequence the chord type and degree...which is tragic , because I was super close to being able to use the octatrack as an arranger and use different track to modulate the various cc’s as stated in the manual.

---

Firmware 1.1.073 for clarification

I replied in another thread as well, but is this happening with both NDLRs you have or just one?
Jesse

Hi thank you for getting back to me.

I have two NLDR's one is chained to the other and they both share the same NLDR control and keyboard channel. I set the 1st midi track on the octatrack to send midi to the NDLR cntrl channel. the setting are to white and black keys key 'C' on the midi cntrl. So with the octatrack I am setting midi trigs and parameter locking the base note(default to C4) and then a midi knob set to cc 27(degree)...

im puzzled because it works and then just konks out. so I unplug the unit and try it again...each time trying to send less sequencer information to the NDLR.

as per one or both crashing. The first one crashes, but there has been an instance where I have left the room for a good bit of time and they both crashed/froze.

the reason I want the octatrack's sequencer is the fact it has an arranger/song mode which I intended to use for builds, stabs/vamps, pedal points, turnarounds, etc.

I do love the NDLR, mind you, its just crashing on something that should be fairly straight forward...