01-24-2021, 10:23 AM
ananda Wrote:Yes, it is the Studio Electronics ATC-1 with 24db filter cartridge! I still love it and keep it in the mix
Thx for the detailed descritption!! It works like a charm.
The only thing I can`t figure out: Is it possible to set a min/max value for the modulation: Let`s say set minimum CC value to 50 and maximum to 127 thus the filter does not completly close? Thus far when I set MOD AMT it only changes the max value.
Glad to hear it works like a charm for you. I was going to suggest setting the pattern to 'chromatic' to allow a range of 60 (to increase the max possible spread of numbers), but I decided to test my recommendation first. It doesn't work at all on my NDLR. Typically, I test my suggestions before writing them, but in my previous message I didn't.
I'll itemize my steps in case JesseJ wants to help out:
01- I've done all of this on Mod Matrix 6, MIDI-A ch 9, CC#32 (all choosen at random for an example)
02- set Mod Src to LFO 1, which is a 5s TRI Uni waveform
03- adjust Mod Amt to 100%
04- display says Mod Range 0 to 127
05- my external MIDI monitor confirms this
06- adjusting Mod Amt to 50%, display says Mod Range 0 to 63, and the MIDI monitor agrees
07- change Mod Src to LFO 2, which is 1s Patt20
Patt20 is:
1- chromatic
2- 8 steps long
3- step values of: 60, 51, 15, 60, 32, 18, 21, and 21
08- Mod Amt is reported as 100%
09- Mod Range 0 to 63 is displayed
10- my MIDI monitor says only 0s are being issued
11-twisting ENC 4 (Mod Amt) clockwise (as if to go greater than 100%) keeps Mod Amt at 100%, BUT Mod Range then changes to 0 to 5, or 0 to 2, or 0 to 3
12- Mod Range randomly bounces around at numbers less than 6 for the maximum for each click twisting clockwise on Mod Amt
13- on occasion the MIDI monitor reports I sometimes get a CC#32 value of 1 or 2 corresponding to the 60 and 51 numbers in my pattern
14- twisting Mod Amt counterclockwise goes to 0% with a reported Mod Range of 0 to 0
In my experience, using a Pattern as an LFO for the Modulation Matrix to spit out CC data doesn't work at all.
Very disappointing.