07-17-2020, 11:57 AM
(This post was last modified: 07-17-2020, 12:05 PM by MrBlaschke.)
(07-17-2020, 07:05 AM)Jesse Johannesen Wrote: We got this fixed! Follow the link below for the firmware Hex and follow the directions on the Conductive Labs website for updating firmware. If you're updating from 1.1.063 or older, you will need to do a factory reset afterwards which will wipe out any user saves you may have, so write down any critical information beforehand, no need to do so if you're using 1.1.066 or later.
FW available here: https://conductivelabs.com/forum/forumdi...php?fid=10
Thanks for the help tracking this down,
Jesse
Fantastic! And great mine got delivered with 1.1.066 - so no factory reset should be needed.My NDLR Backup stuff is not ready yet and i would hate to loose my stored stuff atm
Edit: The Link you posted shows a 404. (Not found)
This one works: https://conductivelabs.com/forum/forumdi...php?fid=10
Gonna try this later on!