Latency with drone

[Jesse Johannesen]

Hi Jesse,

Thank you for everything! Your advice fixed it! Pluging clocking from MIDI DIN B locked everything to the downbeat!

Related but slightly off topic, is there any way to mute the clock out on the NDLR?

It seems it always outputs clock and as a result any device that is not the master or the NDLR doubles in BPM. As such, I fixed the issue by making the NDLR clock, or filter out the clock messages with the mioXM.

Filtering out the messages ins't a problem, but it would be nice to have the option to turn off the clock in cases where I'm using a less sophisticated midi router.


Lastly, I also found it odd that the NDLR wasn't found be the mioXM. I did try a powered hub. The mioXM found other devices connected to the hub, but not the NDLR. I was a little bummed at first, but now that I got the clock worked out, I'm set! (other than trying to find a way to turn off the clock output on the NDLR).

Oh hot dang! Great to see we found a solution!

Turning off midi clock out is located in the global settings menu. To enter press and hold [shift + menu] and powercycle the NDLR it will load in the global settings menu. press motif 1 to toggle the clock out setting, then press panic/motif1/2 toggle at the upper center-right of the unit.

As it turns out the mioXM's usb won't recognize the NDLR for some reason. Steve told me yesterday but I forgot to mention it. Also, I was informed that the NDLR only draws around 90ma of current, so it's unlikely to be under supplied unless for some reason the usb isn't wired for power, which has been known to occur, but apparently is very unusual. 
Jesse