Older Firmware Releases

[Raphie]

There still is something funky going on with usb device enumeration (one unit) where the usb daw driver no longer communicates with the hardware. The driver is still visible, no error messages, daw dat just doesn’t arrive.
Power cycling the mrcc is then NOT enough, only a PC reboot gets the mrcc then back working in Windows.

[crx091081gb]

Any update on when we can get sysex across all the ports?

[Darryl]

Any update on when we can get sysex across all the ports?

Give the latest beta a try. 1.1.051 has added SysEx support on outputs 7 - 12, and the Remote 7 ports. It also doubled the SysEx buffer size to 512 bytes (per input).

[crx091081gb]

Brilliant I’ll download and give it a go! Thanks for prioritising this!

[joelbrave]

1.1 b052 appears to resolve two serious issues for me with Cirklon Connectivity - I no longer need to power on Cirklon first to get usb working on MRCC and I’m no longer getting stuck notes with (dev port on Cirklon) USB virtual cables to DIN ports knock wood but seems to be working well finally. I just updated from 1.30 today.

Joel

[WaldMeister]

1.1 b052 and REMOTE 7 :

holding the remote knob - there is no white frame shown on the 1st screen in the first column of the matrix despite the first R7 port is connected.
(The other 4 ports are marked in the matrix.)

The 2nd screen shows "Out: none" for the R7 ports but they can't be sellected for labels.



I know, that's nothing important and I love the MRCC ... and the very high level of whine! 

Greetings, Michael

[Jesse Johannesen]

What is the expected behavior here? I'm drawing a blank. I don't think we're able to label Remote ports unfortunately.

[WaldMeister]

What is the expected behavior here? I'm drawing a blank. I don't think we're able to label Remote ports unfortunately.

I expected to be able to select the REMOTE 7 ports for labeling.
My fault. So it seems to be a feature request and not a bug report.

[Darryl]

Making this separate post to trigger notification for those that follow this forum.

There's a new beta firmware 1.1.068 with the following enhancements. It's in the first post of this forum. https://conductivelabs.com/forum/showthr...p?tid=1583

Features:

1. Added current Preset Name on Load/Save screen
   
2. Added screen idle timeout to prevent OLED burn-in. The "Screen Off" time can be set on Settings page 2. The screen will sleep when MRCC is "idle" (no MIDI notes). However, the idle timeout reset ignores Clock, ActiveSensing or TimeCodeQuarterFrame MIDI messages and will timeout despite those messages being present. Tap the green button or any other button to turn the screen back on.
   
3. In Channel Map modifier: added a new Chan Source = "-" (none) in lines 2-4. This enables a bunch of Channel mapping possibilities.
   
4. Removed the SHIFT+ required in SAVE / LOAD 'ing presets (no safety on the preset overwrite!!!). 
   

BUG FIXES:

1. Major overhaul of System Exclusive (SysEx) message handling. MRCC should be able to handle any length data to all possible out ports including MRCC to MRCC & MRCC to Remote 7. Please note: It is possible to overrun the MRCC's internal buffers when sending large SysEx files from very fast USB to very slow 5 pin DIN outputs. The sending software should throttle the speed it sends SysEx. Also note, if sending large SysEx files, be sure to temporarily turn off any other MIDI data sources. Once the internal buffers are full, MRCC will block MIDI data on merged inputs, but better chance of success if its not having to handle clock and other messages while the large transfer is happening.
   
2. The last selectable preset name was 128 (F25) - should have been 127 (F24)
   
3. Fix some Preset save issues. If you experienced an issue where after saving a patch, it changed back to Red from Green, this should fix it.
   
4. Activity Screen always shows the correct Preset Label
   
5. When routing remotely and holding the "Y" 5-Pin #1 is not showing MIDI activity
   
6. Fixed some User Label Save/Delete/Assign issues. 
   

[User]

Thanks for update and saving preset fix.

1. In Channel Map modifier: added a new Chan Source = "-" (none) in lines 2-4. This enables a bunch of Channel mapping possibilities.
   

Could you tell something more about that?  How to use it?