Search Results
Post Author Forum Replies Views Posted [asc]
  Thread: Use as an expander?
Post: RE: Use as an expander?

custa1200 Wrote: (11-08-2023, 08:11 PM) -- Is it possible to use the 880 from the MRCC as an expander, i.e. from the 1 of the 4 MRCC USB midi to the 880 PC usb? -- If I recall,  the MRCC USB ports ...
oldgearguy General Support 1 72 11-12-2023, 12:29 PM
  Thread: Problem syncing MRCC MIDI clock to DAW (Reaper)
Post: RE: Problem syncing MRCC MIDI clock to DAW (Reaper...

secretknowledge Wrote: (11-08-2023, 04:42 PM) -- Thanks for your response - I'll do some more research on the Midronome - the price is certainly a lot more attractive. To clarify, with either the ...
oldgearguy Computer MIDI Connectivity 6 111 11-12-2023, 12:14 PM
  Thread: Problem syncing MRCC MIDI clock to DAW (Reaper)
Post: RE: Problem syncing MRCC MIDI clock to DAW (Reaper...

An external clock will solve your problems more effectively. You will be able to tightly sync an E-RM to the DAW and use the MRCC to route clock signals from either the DAW or any of the E-RM ports ...
oldgearguy Computer MIDI Connectivity 6 111 11-05-2023, 04:44 AM
  Thread: MRCC not reporting name correctly to computer
Post: RE: MRCC not reporting name correctly to computer

That also happens to me sometimes. I think it's when I turn on the computer first then one rack with an MRCC then the other. If I turn on both MRCCs before the computer, it seems to be more reliable...
oldgearguy Computer MIDI Connectivity 4 148 10-11-2023, 12:52 PM
  Thread: MRCC Sustain message not sent to layers
Post: RE: MRCC Sustain message not sent to layers

The sustain message is channel specific, that's why the other channels/ routes/modules don't see it
oldgearguy General Support 1 99 10-01-2023, 05:27 PM
  Thread: MRCC and Sample Accurate Clock
Post: RE: MRCC and Sample Accurate Clock

nicuronium Wrote: (09-29-2023, 12:46 AM) -- Jesse Johannesen Wrote: (09-28-2023, 11:21 PM) -- The round trip latency (PC to MRCC out the DIN port, back into DIN port and back to the PC) takes a pret...
oldgearguy Computer MIDI Connectivity 3 169 09-30-2023, 07:28 AM
  Thread: MRCC Clock Divider/Multiplier
Post: RE: MRCC Clock Divider/Multiplier

Yes, it does not sync up to external clocking, so any time manipulation has to come from the MRCC itself.
oldgearguy MRCC Advanced Configuration 3 243 09-04-2023, 03:48 PM
  Thread: MRCC Clock Divider/Multiplier
Post: RE: MRCC Clock Divider/Multiplier

No, MRCC is master clock only.
oldgearguy MRCC Advanced Configuration 3 243 09-03-2023, 05:08 PM
  Thread: NO Boot, NO Lights. Linux
Post: RE: NO Boot, NO Lights. Linux

The old guard has to take care of its own.  I randomly check FB and see you there.  Most of my time has been spent on a few forums,  just helping out when I can.  I've typed and deleted a cou...
oldgearguy General Support 6 258 09-03-2023, 05:06 PM
  Thread: NO Boot, NO Lights. Linux
Post: RE: NO Boot, NO Lights. Linux

I can vouch the he's been around a long time.    Lol He's also got a lot of experience with a lot of hardware and definitely not a newbie.
oldgearguy General Support 6 258 08-31-2023, 07:14 PM
  Thread: Switch between AKAI MPC ONE and PC as main DAW (sequencer, clock)
Post: RE: Switch between AKAI MPC ONE and PC as main DAW...

FWIW, I have a USB switch box connected to a controller keyboard. The two outputs from the USB switcher go to the computer and the MRCC. I had to go through a few different switchers before I found...
oldgearguy General Support 11 531 07-31-2023, 05:14 AM
  Thread: Cannot get MMRC 880 to work with DAW
Post: RE: Cannot get MMRC 880 to work with DAW

Isc there a basic video showing these steps posted to the Conductive Labs site on the main MRCC page? If not, there should be one there. It can be very short, but once you actually see the steps...
oldgearguy General Support 5 471 07-24-2023, 04:57 PM
  Thread: Cannot get MMRC 880 to work with DAW
Post: RE: Cannot get MMRC 880 to work with DAW

I think there's a disconnect here. Once you verified that PC port 1 was selected (holding PC input button and 1 is bright green), to send MIDI to DIN outputs, release the green input button and si...
oldgearguy General Support 5 471 07-23-2023, 12:23 PM
  Thread: Running status for DIN
Post: RE: Running status for DIN

DIN MIDI, TRS MIDI, USB MIDI none of them care about running status. The MRCC should simply pass everything it sees from an input to an output. When you ask the MRCC to merge streams or to do things...
oldgearguy General Support 13 992 05-28-2023, 02:59 PM
  Thread: Running status for DIN
Post: RE: Running status for DIN

dlundqvist Wrote: (05-27-2023, 01:09 PM) -- oldgearguy Wrote: (05-26-2023, 05:40 PM) -- I don't think the MRCC will take 'long' MIDI messages and create running status versions.  I think what Darryl...
oldgearguy General Support 13 992 05-27-2023, 06:07 PM
  Thread: Running status for DIN
Post: RE: Running status for DIN

I don't think the MRCC will take 'long' MIDI messages and create running status versions. I think what Darryl and Jesse are saying is that gear that sends running status is handled properly.
oldgearguy General Support 13 992 05-26-2023, 05:40 PM
  Thread: Sync MRCC Clock to Incoming Clock
Post: RE: Sync MRCC Clock to Incoming Clock

One of the things that has caused the most headaches across all manufacturers and all devices is MIDI clocking. Generating it, syncing to it, distributing it. Just take a look at the history from ...
oldgearguy MRCC Feature Requests 2 263 05-23-2023, 04:24 PM
  Thread: Running status for DIN
Post: RE: Running status for DIN

FWIW, I sent the running status spec to the MRCC guys back in August of 2022
oldgearguy General Support 13 992 05-04-2023, 12:08 PM
  Thread: software editor?
Post: RE: software editor?

Since it doesn't support sysex dumps or CC control over the settings, likely not going to happen. Better approach for short term is some kind of mechanical change to get easy access to the SD Card
oldgearguy MRCC Feature Requests 27 8,046 02-02-2023, 11:58 AM
  Thread: Mrcc, just want some clarification then im buying it!
Post: RE: Mrcc, just want some clarification then im buy...

Dark Waves Wrote: (01-12-2023, 10:45 PM) -- oldgearguy Wrote: (01-10-2023, 05:07 PM) -- I'm using an E-RM multiclock with a pair of MRCCs just fine. -- Hey, I have 2 MRCCs as well, and should soon...
oldgearguy General Support 5 863 01-13-2023, 11:56 AM