+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: Remote port labels (/showthread.php?tid=1777)
Pages:
1
2
Remote port labels - jbdiver - 10-28-2021
How do I assign a label to a remote port? I have the remote 7 box and I can setup routings. Each routing has a port name like r2 but the label is none. I can’t figure out how to set this label.
RE: Remote port labels - Jesse Johannesen - 10-31-2021
I'll take a look and see if I can figure that out. Hold tight!
Jesse
I'm looking at this and I'm not 100% sure that there is a way to do this implemented at this point. If I try to scroll to a destination past the last PC port it just loops back to the beginning. When Steve's back I can ask him, but it may be that he just chose to not have that option because the label data isn't passed via the connection and labeling it could create a situation where the label data is inaccurate between setups. I'll report back if I get anything useful.
Jesse
RE: Remote port labels - jbdiver - 10-31-2021
The mrcc never leaves my studio and the cabling doesn’t change much. Almost 1/3 of my synths are connected to the remote box and these cannot be labeled. This seems like an unexpected user experience.
RE: Remote port labels - benstat - 11-11-2021
FWIW, this is important to me too. I also very rarely change cabling so would be very nice to label remote ports.
RE: Remote port labels - tbatchelli - 11-27-2021
Yes, this is quite a frustrating limitation. Are there plans to fix?
RE: Remote port labels - trustanchor - 12-26-2021
I would also love to see labeling for devices connected via the Remote7.
RE: Remote port labels - Raphie - 12-27-2021
+1 for me too
RE: Remote port labels - Jesse Johannesen - 12-27-2021
Our team is taking a look to see how difficult this would be to implement, we appreciate the feedback and will let you know if we make any progress in this direction.
RE: Remote port labels - xoxo - 09-01-2022
any news about this? my remote is hidden behind a desk, so its always a bit awkward to have to look which cable goes where. now i put a sticky note next to the mrcc, but it would be great to have this inside the box.
RE: Remote port labels - Jesse Johannesen - 09-03-2022
No, I haven't seen anything from Steve on this yet. I will post here if he makes any progress.