+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: Hardware MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=22)
+--- Thread: ACME-4 midi clock (/showthread.php?tid=1671)
Pages:
1
2
RE: ACME-4 midi clock - floris - 11-19-2021
Sorry, no, I should've been more clear.
The Acme has 4 midi din out, and takes midi input over its USB. So I would like to be able to route controllers/sequencers to devices connected to the acme. When I used to do that with the iconnectivity (having the acme connect to it via usb) I was able to route midi to each of the acmes four outputs. The mrcc seems to lack this possibility...
RE: ACME-4 midi clock - Jesse Johannesen - 11-20-2021
Ah, that makes more sense. The USB host ports can only send out 1 port of data, while they can receive 4, so you are correct, the MRCC does lack that possibility.
RE: ACME-4 midi clock - floris - 11-22-2021
So, to get back to my question, you mentioned that it is already a feature request, are there plans to implement multiple virtual outs on USB host outs?
RE: ACME-4 midi clock - Jesse Johannesen - 11-28-2021
No, I do not believe so. Not at this time anyway. I believe that would require a complete rewrite of the architecture of the device, which is not likely to happen anytime soon.
RE: ACME-4 midi clock - floris - 12-01-2021
ah, that's too bad... thanks for the heads up.