Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB compatible (or not) devices list
#31
Waldorf Iridium works over USB as well.
Reply
#32
(08-11-2021, 06:10 PM)Jesse Johannesen Wrote: I think it bears mentioning that in order to say a device works, we should be able to plug it into the unit and power cycle it without issue. It may be worth giving that a shot on these "works" devices to see how they hold up.

Yesterday I tested a couple of devices, including the power-cycle test: 
  • Squarp Pyramid MK2 (OS 4.02): USB MIDI in and out work reliably, also after power-cycles  
  • MFB Dominion Club (v1.05): not working - receives MIDI after first connection to a host port, but once either the device is unplugged, or the device or the MRCC is power-cycled, it no longer connects reliably. No entry for the USB device is added to the labels.
  • Waldorf Blofeld (v1.25): exactly the same as Dominion Club
  • Elektron Syntakt (v1.01): no connection detected, no MIDI data sent or received
  • Elektron Digitakt  (v1.30B): no connection detected, no MIDI data sent or received
  • Elektron Digitone (v1.032a): no connection detected, no MIDI data sent or received

My MRCC is on version 1.1.052.
Reply
#33
I'm having great success with the Waldorf M connected to a usb port.
Reply
#34
can anyone report if this midi controllers work?
fader fox uc4,
midi fighter twister
novation launchpad mini mk3
Reply
#35
According to the tracker:
https://conductivelabs.com/mrcc-usb-host...y-tracker/

the fader fox EC4 works with the MRCC host ports, so I would say it's a good bet the uc4 would work.
The novation launchpad mini we tested was a mk1 and had issues, but worked with the cable that comes with the device. I have a MK3 mini but I couldn't track it down to test it, so I'll try it once it's been located and report back.
We haven't tested the MIDI fighter yet
Reply
#36
Midi twister is working as well. With usb two-way communication, it even show status of cc parameters (led status, when changed by other controller).
Reply
#37
(12-21-2022, 09:15 AM)User Wrote: Midi twister is working as well. With usb two-way communication, it even show status of cc parameters (led status, when changed by other controller).

thanks for let know the the midi fighter twister is working
Reply
#38
I was able to find my launchpad mini MK3 and it works with the USB host ports.
Reply
#39
(12-25-2022, 01:14 PM)Jesse Johannesen Wrote: I was able to find my launchpad mini MK3 and it works with the USB host ports.

thanks
Reply
#40
I can confirm faderfox uc4,midi fighter twister, launchpad mini mk3 works 100%
Reply


Forum Jump:


Users browsing this thread:
3 Guest(s)