Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Squarp Instruments Hermod works over USB
I borrowed a Pyramid MK2 from a friend (it turns out that was the one he had after all) to see if we could reproduce some of the boot up issues. I took it to the lab thinking we were going to need the USB sniffer, but once we got it plugged in the thing booted right up, in fact we were unable to find a scenario where the Pyramid would cause the MRCC to lock up during the hour that we were trying to get it to happen. I wonder if the issue is inrush current? It seems like a possiblity that one of the devices that is connected is getting under powered at start due to initial inrush current of one of the devices. I wonder if there is a usb delayed start expander that would allow you to leave things plugged in but have them start up in an alternating manner through a short delay? I'll dig around and see what I can find.

Messages In This Thread
RE: Squarp Instruments Hermod works over USB - by Jesse Johannesen - 10-08-2021, 06:56 AM

Forum Jump:

Users browsing this thread:
1 Guest(s)