Search Results
Post Author Forum Replies Views Posted [asc]
    Thread: Midi clock from daw to analog clock out
Post: RE: Midi clock from daw to analog clock out

I believe that as of the current (035) firmware, the MRCC *does not* sync to an external clock. So it either has to be the master or it just passes any incoming clocks through to various destinations...
oldgearguy General Support 2 44 Yesterday, 05:13 AM
    Thread: Routing Causing MRCC to Freeze
Post: RE: Routing Causing MRCC to Freeze

So did this problem ever get resolved? It would be good to know the resolution in case other KeyStep37 users run into something similar.
oldgearguy General Support 25 927 10-13-2021, 01:51 AM
    Thread: MIDI Clock in is Crazy!
Post: RE: MIDI Clock in is Crazy!

Usual suspect in cases like this is a MIDI loop where the output of the NDLR is being fed back around into the computer which then sends it back out, etc. Just to verify, check the NDLR MIDI settin...
oldgearguy MIDI Connectivity 3 172 10-09-2021, 02:29 AM
    Thread: Routing Causing MRCC to Freeze
Post: RE: MRCC is basically unusable

Wow - that's a beautiful thing indeed.  Thanks for suggesting this flow. Swapped out KeyStep for the KeyStep Pro. KS Pro connected to MRCC USB C NDLR connected to MRCC USB B Set KS Pro In cloc...
oldgearguy General Support 25 927 10-05-2021, 10:56 AM
    Thread: Routing Causing MRCC to Freeze
Post: RE: MRCC is basically unusable

I tested tonight with just my KeyStep (not much time) Tomorrow I'll use my KeyStep Pro, which has similar features to the 37. As Jesse said - it doesn't lock up and I was able to get the root note...
oldgearguy General Support 25 927 10-04-2021, 04:36 PM
    Thread: Routing Causing MRCC to Freeze
Post: RE: MRCC is basically unusable

Eamoex Wrote: (10-03-2021, 10:53 PM) -- oldgearguy Wrote: (10-02-2021, 03:50 PM) -- I kept my Arturia stuff updated to the latest versions and have the 37 connected (and powered) via the USB only an...
oldgearguy General Support 25 927 10-04-2021, 02:05 AM
    Thread: Routing Causing MRCC to Freeze
Post: RE: MRCC is basically unusable

Jesse Johannesen Wrote: (10-01-2021, 09:31 PM) -- I don't know if the 37 is specifically in our arsenal, but the MRCC was designed interfacing primarily with arturia devices (keystep and BSP) as the ...
oldgearguy General Support 25 927 10-02-2021, 03:50 PM
    Thread: Midi Beat Clock Remote
Post: RE: Midi Beat Clock Remote

hirada Wrote: (09-26-2021, 09:27 AM) -- Well, in the end, it is of course up to the devs to decide, which way would be the easiest to implement this, if it gets implemented at all at some point in ti...
oldgearguy MRCC Feature Requests 4 199 09-27-2021, 02:53 AM
    Thread: Midi Beat Clock Remote
Post: RE: Midi Beat Clock Remote

Wouldn't it be easier to just change the OS to either support actual MIDI clock incoming Start/Stop messages or implement support via MIDI CC messages?
oldgearguy MRCC Feature Requests 4 199 09-25-2021, 08:18 AM
    Thread: Routing Causing MRCC to Freeze
Post: RE: MRCC is basically unusable

When I've been testing the MRCC, the vast majority of the time I caused a lockup or crash was due to a complex route causing a MIDI loop. My suggestion would be to slowly build up the connections fro...
oldgearguy General Support 25 927 09-25-2021, 08:15 AM
    Thread: Channel based routing?
Post: RE: Channel based routing?

Jesse Johannesen Wrote: (09-22-2021, 04:00 PM) -- No, I don't think it would work, but let me talk it out here and see: So we have channel map MOD which allows us to map 4 channels and we only have ...
oldgearguy General Support 9 403 09-23-2021, 01:30 AM
    Thread: Channel based routing?
Post: RE: Channel based routing?

Jesse Johannesen Wrote: (09-22-2021, 09:51 AM) -- I've just re-read this section of the manual and my recollection that the channels re-routed with this mod are shifted to always output on channel 1 ...
oldgearguy General Support 9 403 09-22-2021, 02:19 PM
    Thread: Channel based routing?
Post: RE: Channel based routing?

Maybe -- note that I'm looking at the docs and not in front of my MRCC. Using the Channel to Port mapping (bottom of page 34, 35 of the manual) and then using Channel Map (page 29) you could end up...
oldgearguy General Support 9 403 09-21-2021, 05:53 AM
    Thread: Some hardware only works on USB A
Post: RE: Some hardware only works on USB A

weird because I've been using all 4 USB ports on both my MRCCs for in and out just fine.  As a sanity check, just plugged an Keytronics ASCII keyboard into port D and edited a label with no issues.
oldgearguy Hardware MIDI Connectivity 4 145 09-20-2021, 04:44 PM
    Thread: more inputs
Post: RE: more inputs

amiganut Wrote: (09-19-2021, 10:41 PM) -- I really need more inputs any chance of adding more please -- more inputs (https://conductivelabs.com/forum/showthread.php?tid=1569)
oldgearguy Feature Requests 1 74 09-20-2021, 01:45 AM
    Thread: Velocity Modifier questions
Post: Velocity Modifier questions

Trying to use the Velocity Modifier and have a bunch of questions. Firmware - v1.1.032 Going into the MODS screen, VEL SCALE and I don't know which line/values is input and which is output. Is it...
oldgearguy General Support 1 104 09-05-2021, 10:00 AM
    Thread: MRCC Freezing with Akai Force
Post: RE: MRCC Freezing with Akai Force

zeta4000 Wrote: (09-01-2021, 06:33 AM) -- I have set up my MRCC to have the akai force as the master for a TD3 and BSP but when I press play the MRCC freezes and stops sending all signals through.  I...
oldgearguy Hardware MIDI Connectivity 4 226 09-01-2021, 06:50 AM
    Thread: Logic doesn"t appear to see MRCC?
Post: RE: Logic doesn"t appear to see MRCC?

Jesse Johannesen Wrote: (08-30-2021, 05:58 PM) -- As far as I know there is no special device setup required for a Mac, you should be able to see it if it's plugged in and recognized. The regular tro...
oldgearguy Computer MIDI Connectivity 3 251 08-31-2021, 01:42 AM
    Thread: Clock divider
Post: RE: Clock divider

Flounderguts Wrote: (08-26-2021, 07:21 AM) -- I've been trying to avoid the ERM. I might be able to get a MIDIPal/MIDIGal to do it, but I was hoping to use the MRCC for master clock...if I have mul...
oldgearguy MRCC Feature Requests 5 330 08-27-2021, 01:51 AM
    Thread: USB sysex issues
Post: RE: USB sysex issues

Hmm - for the Hydrasynth -- if you are using the ASM Updater, it will not work for the reasons I listed above. I forget (sold my Hydrasynth some time ago) - can you use MIDI-Ox or Sysex Librarian ...
oldgearguy General Support 12 674 08-26-2021, 11:22 AM