+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: Missing Not Off v1.1.075 : some serious issues (/showthread.php?tid=2420)
Missing Not Off v1.1.075 : some serious issues - johnleborgne - 03-10-2025
Hello,
Seems to have the same issue as for the NDLR
https://conductivelabs.com/forum/showthread.php?tid=2379
First, in the Activity screen, I just see the 0 and no X
Second, I use Mods Vel, and nothing works as expected.
Mods Velo
To Any
In 50 to 90
Out 10 to 127
I always get a second note trigger when releasing keyboard note.
Impossible to use, my Peak just stack every keystroke.
Third, I check with the monitoring tools...
No note off at all.
Each keystroke send two note ON, the second has VEL 0
When using Mod Vel, the second one is with VEL 10.
I've also use a keyboard split and as soon as I use a Mod Alt or Tran on a part of the split (there are no bend at all), it becomes a complete mess.
I think that this may be related to the same problem : no NOTE OFF signal.
Best
John
RE: Missing Not Off v1.1.075 : some serious issues - RadekPilich - 03-10-2025
What keyboard are you using?
I've learned recently that some gear doesn't send note off messages, instead it sends note on with velocity 0, which is equivalent to note off messages according to MIDI standard. However not all synths work correctly with that.