+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: Bricked MRCC after latest firmware update. (/showthread.php?tid=2295)
Bricked MRCC after latest firmware update. - chad.painter@gmail.com - 04-23-2024
I followed the instructions here on the site. using the links therein
I tried the update with my Macbook, which only has three USBC ports. I did the initial using a hub. Then I removed the hub. still nothing
when I pressed the firmware button everything went black.
I made sure and used the correct MRCC firmware available on the update page.
I have tried many different cables usbc usb b to usbc
I have tried my PC with all of the same cables including long and short.
when I power on the MRCC the PC LED flashes briefly
Factory reset does nothing
I have tried earlier versions of firmware. No Joy
Thoughts?
RE: Bricked MRCC after latest firmware update. - vizulefllry - 04-29-2024
Chad,
Did you see this post? Hopefully yours is something similar and you get a resolution.
https://conductivelabs.com/forum/showthread.php?tid=2245
RE: Bricked MRCC after latest firmware update. - chad.painter@gmail.com - 04-29-2024
(04-29-2024, 11:28 AM)vizulefllry Wrote: Chad,
Did you see this post? Hopefully yours is something similar and you get a resolution.
https://conductivelabs.com/forum/showthread.php?tid=2245
I did, and I have scoured the forums for resolutions. I have seen several similar situations but none of their solutions addressed them. Thank you so much for sharing though I love this community.