![]() |
OXI One via USB - Printable Version +- Conductive Labs Support Forum (https://conductivelabs.com/forum) +-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13) +--- Forum: Hardware MIDI Connectivity (https://conductivelabs.com/forum/forumdisplay.php?fid=22) +--- Thread: OXI One via USB (/showthread.php?tid=2289) |
OXI One via USB - uparrow - 04-18-2024 I'm having trouble connecting OXI One to MRCC via USB. When using TRS MIDI everything works totally fine, but since OXI has three outputs, I'd have to use three DIN cables with the splitter, which is fine and works, but uses up three of the inputs on MRCC. I think I saw someone mention they had MRCC working with OXI over USB, but I couldn't really figure out how. RE: OXI One via USB - User - 04-29-2024 My OXI works with MRCC via USB. I sent MIDI messages to OXI, and OXI send midi messages to MRCC. RE: OXI One via USB - Darryl - 05-14-2024 We've tested OXI USB MIDI with MRCC USB host ports. It initially did not work, but that was fixed with an OXI firmware update quite a long time ago. Regarding 3 outputs on OXI; it would make sense to use 3 MIDI channels on one port rather than use up 3 inputs on MRCC. If you are still stuck on this, please provide as much detail as possible, what you have tried and what the results were. RE: OXI One via USB - FlavioB - 05-29-2025 Hi. So is it now working? Meaning: is it possible to use USB MIDI connectivity between OXI One MK1 and MRCC? RE: OXI One via USB - Jesse Johannesen - 06-01-2025 I'll ask but I think this is a yes. I remember the team having borrowed one, figured out what was going on and contacted the OXI dev and let them know how to fix it. I will double check and let you know once I confirm. RE: OXI One via USB - FlavioB - 06-01-2025 Thanks in advance! So this product (MRCC) is still being worked on and is fully supported/maintained? The last firmware version is already 2 years old... RE: OXI One via USB - RadekPilich - 06-02-2025 (05-29-2025, 12:08 AM)FlavioB Wrote: Hi. Yes, but only 2 out of 3 OXI outputs are accessible. I use OXI Split + MRCC xPander to get access all 3 outs and use only 1 USB port on MRCC. RE: OXI One via USB - FlavioB - 06-02-2025 (06-02-2025, 04:13 AM)RadekPilich Wrote: Yes, but only 2 out of 3 OXI outputs are accessible. I use OXI Split + MRCC xPander to get access all 3 outs and use only 1 USB port on MRCC. Good to know, thanks. How happy are you with the integration of OXI One with MRCC? (06-02-2025, 04:13 AM)RadekPilich Wrote: Yes, but only 2 out of 3 OXI outputs are accessible. I use OXI Split + MRCC xPander to get access all 3 outs and use only 1 USB port on MRCC. RE: OXI One via USB - RadekPilich - 06-02-2025 (06-02-2025, 04:38 AM)FlavioB Wrote: How happy are you with the integration of OXI One with MRCC? Well, there is no integration to speak of, it's just regular MIDI I/O. It works fine, the main issue for me is the lack of MIDI control of the transport of the internal MRCC clock generator. You might not need to use MRCCs clock and transport instead of the OXI's, depending on how complicated your setup is. |