+- Conductive Labs Support Forum (https://conductivelabs.com/forum)
+-- Forum: MRCC - MIDI Router Control Center (https://conductivelabs.com/forum/forumdisplay.php?fid=13)
+--- Forum: General Support (https://conductivelabs.com/forum/forumdisplay.php?fid=14)
+--- Thread: Problem with MRCC FW update (/showthread.php?tid=2240)
Problem with MRCC FW update - BruenMusic - 01-02-2024
Hi there,
I tried updating my MRCC from FW version v 1.1.052 to v 1.1.075, but have issues.
I opened the hex file in the Teensy loader. Click on the Auto button (lights up bright green, like in the instructions). The Blue light is lit on the MRCC and then I push the recessed FW button on the MRCC. The blue light will go off and ... nothing happens. The unit is on, but can't excess anything. When powercycling it does boot. For clarity: No I did not use the FW of the NDLR.
I used the Teensy loader both on Windows 10 and on Mac OS (Sierra).
What am I missing? Or am I missing a step?
Here's what the LOG-file says:
15:52:52.826 (loader): Teensy Loader 1.58, begin program
15:52:52.944 (loader): File "C:\Users\Marco\Downloads\MRCC\MRCC_v1.1.075_08-23-2023.hex_\MRCC_v1.1.075_08-23-2023.hex", 268648 bytes
15:52:52.945 (loader): File "MRCC_v1.1.075_08-23-2023.hex". 268648 bytes
15:52:52.956 (loader): Listening for remote control on port 3149
15:52:52.956 (loader): initialized, showing main window
15:52:53.193 (loader): HID/win32: vid:046D pid:C52B ver:1203 usb:0/140000/0/5/6
15:52:53.193 (loader): HID/win32: vid:046D pid:C52B ver:1203 usb:0/140000/0/5/6
15:52:53.193 (loader): HID/win32: vid:046D pid:C52B ver:1203 usb:0/140000/0/5/6
15:52:53.194 (loader): HID/win32: vid:046D pid:C52B ver:1203 usb:0/140000/0/5/7
15:52:53.194 (loader): HID/win32: vid:046D pid:C52B ver:1203 usb:0/140000/0/5/7
15:52:53.194 (loader): HID/win32: vid:046D pid:C52B ver:1203 usb:0/140000/0/5/7
15:53:04.804 (loader): Open File event
15:53:17.532 (loader): File "C:\Users\Marco\Downloads\MRCC\MRCC_v1.1.075_08-23-2023.hex_\MRCC_v1.1.075_08-23-2023.hex", 268648 bytes
15:53:17.532 (loader): File "MRCC_v1.1.075_08-23-2023.hex". 268648 bytes
15:53:19.588 (loader): Auto Button event
15:53:19.588 (loader): Auto mode: enabled
15:53:32.424 (loader): Verbose Info event
RE: Problem with MRCC FW update - Jesse Johannesen - 01-03-2024
The biggest issue that I see with this is that the user will occasionally connect to the computer with the USB C "Power" port, rather than the USB B "PC" port. Can you confirm for me that you're connected to the computer with the PC port for me?
RE: Problem with MRCC FW update - BruenMusic - 01-04-2024
Hi Jesse,
Thanks for clarifying this. I was connected with the USB C "Power" port, because I did my other FW updates that way too (I think).
Will try with the computer PC port and let you know.
RE: Problem with MRCC FW update - BruenMusic - 01-04-2024
Hi Jesse, used the PC port and worked. Problem solved. Thanks!
Love my MRCC!